How To Clean A Mouse (Quick And Easy)

To clear a mouse externally, use a microfiber material dampened with some faucet water. It’ll simply wipe out a lot of the exterior mud, grime, and sweat stains.

For cussed stains like sticker marks, it’s best to use Isopropyl alcohol as an alternative.

If you need to deep-clean the internals as effectively, you should be a bit more cautious. Strictly keep away from using any form of liquid cleansing agent and solely follow a Q-tip, an electrical duster, or a can of compressed air.

Let’s get into the main points now.

Before You Begin

Here are some things it’s best to take into account earlier than cleansing the mouse.

Cleaning the Mouse Chassis

To begin, unplug the mouse out of your PC. For a wi-fi mouse, first take away its batteries. Also, toggle off the ability swap. Then,

Do observe that for stains like sticker marks, it’s higher to make use of some rubbing alcohol. But make certain the focus of alcohol is at most 70%. Not 1% more.

I as soon as occurred to make use of laboratory Isopropyl alcohol with a focus of 90%. Sadly, I misplaced the rubber grip and plastic coating of certainly one of my favourite mice, the Razer DeathAdder Elite. I don’t need the identical factor to occur with you.

If the alcohol composition is increased, you may dilute the answer. Regardless, make certain the alcohol doesn’t stay within the mouse shell for lengthy. I counsel you wipe it shortly to be on the secure facet.

Tip: You can even use child wipes, lens wipes, makeup-removing tissue, or a glass cleaner (<70% alcohol) to shortly clear your mouse.

Cleaning the Internals

Cleaning the internals of your mouse is usually not crucial. But when you’ve got stiff buttons or screeching sound from the scroll wheel, be at liberty to do it.

Just ensure you know what you might be doing, as any forceful motion might harm your mouse completely.

• First, disassemble your mouse and get the shells aside.
• Then, carry an electrical duster and blow the mud from the internals. Make certain you cowl your complete circuit board.
• Clean the buttons and scroll wheel, too.
• Also, make certain there’s no mud/lint on the sensor.
• Detach the principle board from the shell and clear the lens, too.
• In case you might be using a can of compressed air, strictly place it no less than 3 to five inches away. The air strain distinction can type water drops within the mouse, in the end damaging it.
• After that, get a dry Q-tip and clear the corners. You may additionally use a sheet of paper to wash the small gaps.
• For fibers/hair strands, use tweezers and pull them out.
• Once every thing is sorted, reassemble your mouse, and it is able to use.

Note: Cleaning might be fairly difficult should you personal a honeycomb shell mouse like Steelseries Aerox 3 and Glorious Model O. I like to recommend you utilize a Q-tip (dipped in water and principally dried) to wash such mice.