12 Simple Ways to Extend Battery Life on your Wear OS Smartwatch

Conventional timepieces have a protracted battery life, however with regards to smartwatches they merely fail to final you as a lot. In reality, the more options your smartwatch packs in, the lesser will probably be its battery. Wear OS watches are identified to final you someplace between a day or two which implies you’ll have to plug them right into a socket at the least 3-4 instances every week. 

If you personal a Wear OS device and also you need to take advantage of your watch’s battery, then the next steps would possibly enable you lengthen its battery life. This manner, you may decrease its charging cycle considerably with the intention to use it for an extended interval with out choosing a battery substitute.

: How do I Pin your Favorite Apps on Wear OS

1. Choose a much less interactive watch face

Believe it or not, probably the most interactive factor in your Wear OS device truly finally ends up draining probably the most of your battery. Yes, we’re speaking about watch faces which outline your fashion while you’re out and about carrying your smartwatch however on the identical time, it takes a toll in your wearable’s battery life.

The more interactive and informative the watch face, the more battery it drains out of your smartwatch. If your watch reveals tons of health or well being data or has interactive data like a coronary heart charge monitor, step counter, it’s certain to make use of up most of your battery. 

You can select a primary watch face on your Wear OS device, one which will get you thru the day with out the information you don’t essentially want. 

You can change the watch face in your Wear OS smartwatch by unlocking it, long-pressing in your present watch face, and deciding on the watch face you assume is primary and gained’t drain your battery.

Alternatively, you may modify your device’s watch face by opening the Settings app and going to Display.

Now, faucet on the ‘Change watch face’ possibility. 

: How do I Change your Keyboard on Wear OS Android Smartwatches

2. Lower your display brightness or set it to “Automatic”

Most Wear OS watches these days include ambient gentle sensors that permit them to switch the brightness of the watch’s show based mostly in your environment. This would possibly assist them effectively save your watch’s battery life particularly while you’re in a dimly-lit and also you don’t need the watch’s display to gentle as much as its most settings. You can permit your watch to mechanically regulate the display brightness by opening the Settings app.

Now go to ‘Display’. 

On the following display, choose the ‘Adjust brightness’ possibility. 

Select the ‘Automatic’ possibility from the highest to set it as your default setting. 

You can even set the brightness to the bottom worth “1” if you wish to save probably the most battery. 

In case your smartwatch doesn’t have ambient gentle sensors, you gained’t be capable to use the Automatic brightness setting to regulate the display brightness mechanically. In that case, you’ll want to manually regulate your watch’s battery life.

For saving the battery life more, swipe down in your watch’s foremost display, and faucet on the brightness icon (the one which resembles the solar) from the highest. 

You ought to now be capable to see the ‘-‘ and ‘+’ buttons on both facet of the watch. Tap on the minus signal to decrease down the brightness to the least setting to avoid wasting probably the most battery.

In conditions the place you want more brightness like while you’re out in daylight, you may improve your brightness by tapping on the plus image. 

3. Disable Always-ON show

Just like on smartphones, Wear OS watches additionally include an Always-On show (AOD) that offers a glimpse of essential data out of your watch on a regular basis with out you needing to press a button, tilt your watch, or contact it. Although AOD has turn into fairly environment friendly at using the least battery, turning it off should get you more hours off of your smartwatch battery. 

You can swap OFF the Always-ON show on Wear OS by opening the Settings app. 

When the Settings app opens up, choose the ‘Display’ part from the display. 

On the following display, scroll down and toggle off the ‘Always-on screen’ choice to disable AOD. 

4. Minimize your display timeout

When you aren’t using your watch, the ambient mode or Always-On show kicks in after 5 seconds of inactivity. If you had elevated this timeout previously in order that you could possibly view your watch display for longer, you would possibly need to carry it all the way down to its lowest setting to take advantage of your smartwatch battery. 

This will be performed by opening the Settings app, going to Display > Screen timeout, after which deciding on the bottom worth (in all probability 5 seconds) from the checklist of choices. 

5. Disable “Ok Google” Detection

Wear OS watches which have an inbuilt microphone can be utilized to summon Google Assistant by way of voice enter. However, the identical will be triggered by long-pressing the crown or facet button on them. So, if you wish to save battery, you may disable the “Ok Google” Detection in your Wear OS device by opening the Settings app, then going to ‘Personalization’.

On the following display, swap the ‘Ok Google’ Detection toggle to OFF place. 

6. Limit sure app from sending you notifications

Besides providing you with an concept of your physique’s important indicators, smartwatches additionally offer you your telephone’s notifications so that you just don’t want to succeed in your cell device to know who’s calling or texting you. The comfort, nevertheless, comes at a price as your watch vibrates or lights up each time there’s an oncoming notification, which in flip drains a fair proportion of your battery.

If you want to obtain notifications but in addition protect your watch’s battery, you may restrict some apps from sending you notifications in your watch. This can’t be performed in your watch and you will want to make use of the Wear OS app in your telephone to entry these settings. Open the Wear OS app in your cell device to get began. 

Make certain your watch is linked with the Wear OS app. For this, you must allow Bluetooth on each the Wear OS device and your telephone. 

Once your watch is proven as linked contained in the Wear OS app, scroll down and faucet on the ‘Notifications’ possibility underneath the ‘Settings’ part. 

Here, faucet on the ‘Change watch notifications’ possibility. On the following display, disable the toggles adjoining to the apps you don’t need to see notifications from. When you disable this, all notifications from the disabled apps gained’t be proven on the watch however you’ll nonetheless be capable to view them in your telephone. 

You can disable notifications from as many apps as you need to decrease your notifications muddle and thus, save your watch battery. 

7. Apply a battery mode in case your watch helps it

Some Wear OS watches like those from Fossil provide its customers a more environment friendly manner of saving their watch’s battery. With the launch of its Gen 5 sequence smartwatches, Fossil has been providing devoted sensible battery-saving modes with claims to get you a number of days of utilization on a single cost. Since then, the characteristic has additionally been rolled out to a few of the older smartwatches together with Fossil Sport, Diesel Axial, Kate Spade Scallop Sport, Michael Kors MKGO, Puma Smartwatch, and more. 

If you’re using one of many appropriate watches, then you may entry these battery modes by unlocking your watch, swiping down from the highest of the primary display, after which tapping on the battery icon from the Quick Settings display. 

From right here, you may choose your most well-liked battery mode from any of the next choices.

Daily: Set by default on Fossil watches, this mode is much less of a battery saver however provides a lot of the options. The Daily mode allows the Always-On show, WiFi, Bluetooth, Button-to-wake, Touch-to-wake, Notifications, and Vibration. You would possibly use this mode in case you’re okay with charging your watch each evening.  

Extended: Extended mode is designed to final you longer than a day because it turns off AOD, WiFi, Touch-to-wake, Tilt-to-wake, “Ok Google” Detection, and Bluetooth scheduling. 

Custom: As the identify implies, Custom Mode offers you the ability to regulate which options are enabled, and which of them stay off. You can select to disable the next choices in case you want to: Speaker, WiFi, Location, NFC, “Ok Google” Detection, Touch-to-wake, Tilt-to-wake, Bluetooth, and more.  

Time Only: This is the mode that may get you probably the most battery life because it strips your whole smartwatch’s options and basically helps you to use it to solely examine the time. You can activate this mode at instances you’re not actively carrying your watch so that you just’re left with juice the following time you want to use it. 

8. Allow Battery Saver to activate mechanically

Besides these battery modes, Wear OS additionally has an possibility to show ON Battery Saver mode when the battery is operating low. Depending on the watch you personal, you may set it to mechanically allow Battery Saver when the battery goes all the way down to 10 or 15 %. When Battery Saver is turned ON, your watch will cease displaying you notifications and disables location, background knowledge, vibration, Always-On show, Wi-Fi, and Bluetooth. In some ways, the Battery Saver mode resembles the Time-Only mode out there on Fossil watches as you may solely examine the time in your watch. 

To mechanically activate Battery Saver, open the Settings app in your watch. 

Tap the ‘System’ possibility from the Settings display. 

Select ‘Battery’. 

On the following display, flip ON the ‘Battery saver at x%’ toggle. 

9. Turn OFF “Tilt-to-wake” and “Touch-to-wake”

If you already don’t have the ‘Always-On display’ possibility turned OFF, then yet one more manner of waking up your watch’s display will probably be to make use of the “Tilt-to-wake” and “Touch-to-wake”. With the previous possibility, you may wake the display by lifting your wrist whereas the latter helps you to contact the display to wake it up.

Although these is perhaps a great way of saving your battery, using these options imply that one of many sensors in your watch is consistently in search of a supply of enter – gyroscope or contact. This in flip drains a big chunk of your battery. 

Fortunately, you may swap off each of those capabilities by opening the Settings app in your watch and going to ‘Gestures’. 

On this display, disable the toggles adjoining to the “Tilt-to-wake” and “Touch-to-wake” choices to take advantage of out of your battery. 

With each of those options turned OFF, don’t fear, you may nonetheless wake your watch display by urgent the facet button or the crown button in your smartwatch. 

10. Enable Theatre mode while you don’t want your watch’s display

You can quickly flip off your watch’s display in order that it doesn’t gentle up each time there’s a notification. This is finished using the Theater mode perform that’s out there on just some Wear OS gadgets. This mode additionally makes certain that your watch isn’t woken up while you contact it or carry your wrist and the one technique to truly wake it up could be to press the ability button. 

To flip ON Theatre Mode, unlock your watch and swipe down from the highest of the primary display. 

This ought to carry up the watch’s Quick Settings display. From right here, faucet on the watch icon to activate Theater mode. 

Your display will go black however your whole watch’s background capabilities will nonetheless work as you count on them to. You can use this mode to permit health and exercise monitoring whereas wanting to avoid wasting battery by stopping the display from lighting up. 

To get up the watch display, merely press the crown or facet button on the watch. 

11. Disable Bluetooth and WiFi connection until required

We perceive that you just want your smartwatch to remain linked for getting your telephone notifications on it. But you solely want one in every of these connections to get your notifications and health knowledge synced between your telephone and watch. This means, when operating low on cost, you may both swap ON WiFi or connect with your telephone by way of Bluetooth to exercise particulars and notifications between your two gadgets. You can even use the steps under to show OFF each the connectivity capabilities to avoid wasting probably the most battery. 

To flip OFF Wi-Fi on Wear OS, unlock your watch, open the Settings app, and go to ‘Connectivity’. 

On this display, choose ‘Wi-Fi’. 

To flip it OFF, disable the toggle adjoining to ‘Wi-Fi’.

You can now head back to the Connectivity display by swiping from left to proper on the WiFi display. 

To disable Bluetooth, faucet on the ‘Bluetooth’ possibility contained in the ‘Connectivity’ display. 

Now, toggle OFF the ‘Bluetooth’ possibility on the following display and ensure it stays greyed off. 

You can swap ON both of those connectivity choices by following the identical steps as above while you require your watch to be linked to your telephone. 

12. Uninstall apps draining your Wear OS battery

Like in your telephone, too many apps on Wear OS may cause your watch to decelerate and drain more battery than it ought to due to too many sources being consumed within the background. In these conditions, merely disabling the notifications from these apps gained’t do justice to your battery however eradicating them out of your watch would possibly actually assist. 

You can uninstall the apps you don’t assume is important to you from Wear OS by opening the Settings app. 

Inside Settings, choose ‘Apps & notifications’.

Tap on the ‘App info’ possibility.

Select the app you need to take away out of your watch.

On the following display, faucet on the ‘Uninstall’ possibility.

You will probably be requested to substantiate the method. Tap on the purple tick mark button to uninstall the chosen app out of your watch. 

You can repeat the aforementioned steps to take away as many apps as you need out of your Wear OS device. 

These are all of the methods you may take advantage of your watch battery on Wear OS.