How To Look Up For Hardware Id On Your PC

{Hardware} ID is a singular identifier to your units that your system makes use of to match it to its driver. You should utilize this worth to verify for a particular machine on the web or official web sites if you might want to update its driver or troubleshoot any points with its software program.

A {hardware} ID normally follows the format <BUS><VENDOR ID>&<Machine ID>&<Further IDs>. As an illustration, the ID for Generic USB Hub could present USBVID_05E3&PID_0608&REV_6090. Nevertheless, the identification for root units and the pc doesn’t observe this format.

On this article, we offer probably the most handy methods to search for this info in your Windows PC.

How to Lookup for {Hardware} ID on Your PC

You should utilize the Machine Supervisor or built-in command line instruments to search for the {hardware} Id for particular person units in your PC. However, if you need more choices, you need to use the Windows Machine Console.

Utilizing Machine Supervisor

The Machine Supervisor is the built-in Windows device that helps you verify and management all of the units in your PC. You too can use it to search for the {hardware} IDs of such units.

1. Open Run by urgent Win + R.
2. Kind devmgmt.msc and press Enter to launch the Machine Supervisor.
3. Develop the machine class for the machine you wish to search for.
4. Proper-click on the machine and choose Properties.
5. Go to the Particulars tab.
6. Click on on the drop-down field below Property and set it to {Hardware} Ids.

The {Hardware} ID will present up below Worth.

Additionally, remember that a tool could have multiple ID. Nevertheless, the highest ID is probably the most particular one.

Utilizing Windows Command Line

You too can use the Command line interfaces comparable to Command Immediate or Windows PowerShell to search for the {hardware} ID of your units.

Command Immediate

Command Immediate is the standard command line on the Windows system. You should utilize the DISM utility to verify your units and get their {hardware} ID.

1. Open Run.
2. Kind cmd and press Ctrl + Shift + Enter to open the Elevated Command Immediate.
3. Enter the next command to checklist out your units:
   Dism /On-line /Get-Drivers /all /Format:Desk
4. Examine the category identify to get a basic thought of your driver. It’s going to checklist all of the doable drivers, so you’ll be able to add | findstr “search string” on the command to solely checklist the required ones.
   For instance, Dism /On-line /Get-Drivers /all /Format:Desk | findstr “usb”
5. The command solely lists the Unique and Revealed names, not the overall names. Observe down or copy the Revealed Title.
6. Then, enter the command Dism /On-line /Get-DriverInfo /Driver:<Revealed Title>.
7. This command lists the knowledge on all of the units inside the class, not simply these energetic in your PC. So, you might want to search rigorously to your machine by checking the Description column.
8. After figuring out the machine, take a look at its {Hardware} ID worth.

Windows PowerShell

Windows PowerShell is a robust Command Line device that you need to use to regulate all of your system actions. You even have numerous choices for customizing the instructions, so it’s an efficient approach to get the required info.

1. Open Run.
2. Kind powershell and press Ctrl + Shift + Enter to open the Elevated PowerShell.
3. Enter the next command to checklist your units:
   Get-PnpDevice -PresentOnly | Type-Object -Property “Class” | Format-Desk -AutoSize
   
4. Then, seek for your machine utilizing the Class and FriendlyName columns and duplicate or observe down its InstanceId.
5. Then, enter the next command whereas changing the Occasion ID with the worth you copied or famous:
   Get-PnpDeviceProperty -InstanceId "Occasion Id" | Format-Desk -AutoSize
6. Right here, seek for DEVPKEY_Device_HardwareIds and verify its Knowledge to get this info.

Utilizing Windows Machine Console

It’s simple to verify the {Hardware} ID of a tool utilizing the Machine Supervisor or the built-in Command line. Nevertheless, you’ll be able to solely search for this info for one or a couple of units at a time. If you wish to search for the ID for all of your units or the units inside a particular class, you might want to use the Windows Machine Console (Devcon).

Microsoft doesn’t present this utility within the default Windows OS however consists of it in its Windows Driver Package. So you might want to set up this bundle earlier than you need to use the Machine Console.

1. Obtain and set up Windows Drivers Package from Microsoft’s platform. You solely must obtain the WDK and never the SDK or Visible Studio.
2. Then, you might want to set the placement of the console on the system path so that you could entry it from anyplace on the Command line. To take action,
3. Now, open Run.
4. Kind cmd and press Enter to open the Command Immediate.
5. Enter the instructions under to search for the {hardware} ID in keeping with the corresponding state of affairs:
   • devcon hwids *: Record out all units with their {hardware} Ids
   • devcon hwids =<class>: Record out the {hardware} IDs for all units in a selected class. You may search for the obtainable courses utilizing the command devcon listclass
   • devcon hwids * > “D:HardwareId.txt”: Create a HardwareId.txt file in D: which lists all units with their {hardware} IDs. You should utilize any location you need or create a textual content file that shows the output of the opposite command.

If you wish to know more about utilizing Devcon to verify and handle your units, we suggest you go to its documentation on Microsoft.