6 Ways to Fix Windows 11 Stuck on Preparing Windows Loop

There are occasions when Windows will get caught whereas performing essential operations like putting in safety updates. Just lately, customers have reported that their Windows 11 PC will get caught within the Getting ready Windows loop, which prevents them from booting into Windows after the working system is up to date.

This error usually happens when both some essential system information are lacking, or the scale of the update is massive. Beneath, we now have listed some doubtlessly efficient troubleshooting strategies you can attempt if you end up in the same state of affairs.

1. Restart Your PC

Earlier than we transfer in direction of any difficult troubleshooting strategies, we propose that you just attempt to restart your PC (when you can entry the essential Windows options) and see if that makes any distinction. Typically, Windows will get caught whereas performing a specific operation resulting from a short lived corruption error inside the system.

If the error will not be extreme, then restarting ought to repair the issue for you.

Observe these steps to proceed:

1. Click on on the Energy icon on the Windows menu.
2. Select Restart from the context menu.

   

If the essential restart methodology didn’t do the trick for you, then you’ll be able to attempt to carry out a tough reboot. This appears to work when the system will get caught within the ‘Getting ready to configure Windows’ loop upon making an attempt to close the system down.

Nevertheless, this methodology includes reducing energy from the machine, so we advocate that you just solely proceed with it if you have already got expertise doing so.

Right here is how one can carry out a tough restart:

1. Press and maintain the energy button till the pc shuts down.
2. Disconnect any peripherals out of your pc and unplug it out of your energy supply. If it has a battery, take away it.
3. Look forward to a few minutes for the PC to chill down.
4. Plug your pc again into the facility. In the event you eliminated its battery, insert it again, and energy your machine on.
5. Set up all of the pending updates accessible after reboot, and restart your PC once more.

Hopefully, the system is not going to get caught within the making ready Windows loop this time.

2. Troubleshoot in Restore Mode

If each the strategies of restarting Windows didn’t do the trick for you, then it’s time you proceed with a bit more difficult strategies to establish the reason for the difficulty and repair the issue.

On this methodology, we are going to first boot into the Restore Mode after which attempt just a few totally different troubleshooting strategies to get Windows out of the making ready loop.

After booting into the Restore Mode, we propose that you just take your time to carry out all of the strategies one after the other till one works for you.

Boot Into Restore Mode

The simplest approach to boot into the Restore mode is by utilizing a keyboard shortcut. Within the configuration display, press the F11 key in your keyboard repeatedly until Windows shows an Superior Startup display.

If this doesn’t give you the results you want, shut down your PC while you’re on the configuration display utilizing the facility button. Do that two instances, and upon the third reboot, Windows will routinely launch the Restore Mode, the place you will note the Superior Startup menu.

In case this fails too, then the one approach to boot into the Restore Mode is by creating an set up media on one other PC. The steps of doing so on each Windows 10 and Windows 11 are virtually the identical; simply just be sure you set up it on to a USB or a disc.

After the set up media is created, insert the media into your pc and energy in your PC whereas urgent your respective BIOS boot menu key.

Run System Scans

After you’ve got efficiently booted into the Restore mode, you can begin performing troubleshooting strategies. The primary methodology is working the SFC, DISM, and CHKDSK utility by way of Command Immediate.

These utilities will scan the protected system information and disks for inconsistencies inflicting the problems at hand. In case your system is contaminated with any such errors, the instruments will resolve the issue by changing the defective system information.

Observe these steps to proceed:

1. Within the Restore mode, head over to Troubleshoot > Superior choices.

   

2. Select Command Immediate.

   

3. Within the following window, kind BCDEDIT and click on Enter.

   

4. Search for the drive by which Windows is put in. Sometimes, it’s the Drive C, however that might not be the case for everybody.
5. Then, execute the next command. Substitute the <Windows_Drive_Letter> with the letter of the drive containing Windows.

   sfc /scannow /offbootdir=<Windows_Drive_Letter>: /offwindir=<Windows_Drive_Letter>:windows

   

6. After the command is executed, proceed with executing the next instructions:

   DISM /On-line /Cleanup-Picture /StartComponentCleanup

   

   DISM /On-line /Cleanup-Picture /AnalyzeComponentStore

   

7. Then, execute this command:

   DISM /On-line /Cleanup-Picture /RestoreHealth /supply:F:SourcesInstall.wim:1 /LimitAccess

   

8. Lastly, run the Test Disk utility by executing the next command. Be sure you insert your related drive letter within the place of [driveletter]:

   chkdsk [driveletter] /f /r /x

   

Now you can restart your PC and see if executing the command above made a distinction.

Launch Protected Mode

Protected Mode with networking boots your system with solely the set of drivers and applications important for it to run. It’s mainly a diagnostic mode that helps you establish the reason for an error after which repair the issue.

Besides into Protected Mode, comply with these steps:

1. Launch the Restore Mode and navigate to Troubleshoot > Superior choices > Startup settings.
2. Within the following window, click on on the Restart button.

   

3. Then, press F5 in your keyboard as well into Protected Mode.

   

4. As soon as you’re within the Protected Mode, head to the Begin menu.
5. Select Shut down or Signal out > Restart.

Test if, upon reboot, your system launches with none issues. You may also add a Protected Mode shortcut to Windows 11’s boot menu to launch it quicker if one thing like this occurs sooner or later once more.

Uninstall Updates

One more reason you may encounter the difficulty at hand is corrupt or defective updates. In the event you began experiencing the difficulty after updating your system, you can uninstall the updates.

Right here is how:

1. In Restore Mode, navigate to Troubleshoot > Superior choices > Uninstall Updates.
2. Within the subsequent window, click on on Uninstall latest high quality update possibility.

   

3. Click on on the Uninstall high quality update button.

   

4. As soon as the uninstallation course of is full, click on on the Achieved button.
5. Then, hit Proceed to launch Windows.

   

Reset PC

Lastly, if the strategies above haven’t proved to be efficient, then the one viable answer at this level is resetting the PC.

1. In Restore Mode, head over to Troubleshoot > Reset this PC.

   

2. Observe the on-screen directions to proceed.

This could repair the difficulty for you.

Getting ready Windows Loop Fastened for Good

After performing the troubleshooting strategies above, it is best to be capable of boot into Windows efficiently. Upon booting, we propose you put in the pending driver and system updates. This can enable you steer clear of any such points sooner or later.