PS4 Controller Won’t Charge – 10 Easy Fixes

You can use your DualShock 4 controller both wirelessly or with a USB plug. Sometimes, although, your PS4 controller received’t cost, so using the peripheral with out cables just isn’t potential.

There’re numerous the reason why your PS4 controller isn’t charging. These could possibly be minor bodily points, like mud and cable harm. Or it could possibly be software program issues, which can power you to reset and update the console.

It’s a standard drawback, although, which implies there’re widespread options.

Possible Reasons Why Your PS4 Controller Won’t Charge

How to Fix PS4 Controller Won’t Charge?

When you join your PS4 controller to the console with a charging cable, it ought to cost. However, you may even see that the lights on the controller’s entrance aren’t turning on. This means the PS4 controller just isn’t charging.

If that is the case, attempt our options, one after the other, till you discover the one which works for you.

Reset the Controller

Generally, a random bug damages the connection between the PS4 and the controller. So, the primary answer is resetting your peripherals. 

1. Turn off your PlayStation 4
2. Unplug your controller
3. Unplug your PlayStation 4
4. Find the reset button on the back. It’s a small button beneath the L2. 
5. Use a small software to push the button inside, like a pin. Hold the reset button for five seconds a minimum of. 
6. Connect the controller to the PS4 through the USB cable
7. Plug the PS4
8. Press the PS button.

If the sunshine bar on the entrance turns blue at this level, the answer works. 

Re-pair the Controller

The next answer is re-pairing the controller. 

1. Turn on the PS4
2. Go to Settings
3. Go to Devices
4. Select “Remove all devices from the list.”
5. Turn off the console
6. Reset the controller by pushing its reset button with a bobby pin for 5 seconds
7. Turn on the console, and join the controller with the USB cable
8. Press the PS button on the controller
9. When the controller gentle activates, you could take away the cable and use it wirelessly once more

After this level, verify if the controller can cost. 

Power Cycle the Console

The third choice is doing a full energy cycle to your PS4. It typically helps erase random bugs.

1. Turn off the PS4 and the controller
2. Unplug the PS4’s energy wire
3. Wait for half-hour
4. While the console is off and unplugged, maintain down the facility button for 30 seconds to empty off the vitality it has left
5. Plug the PS4 back
6. Turn it on

By now, you must see if this fixes the issue.

Reset and Update

Let’s mix the options above for a more complete strategy:

1. Turn on the PS4
2. Go to Settings, after which Devices
3. Select “Turn off device.” It will take you to a display screen the place you may select to close down “All” gadgets, or choose a specific one.
4. Select All
5. Turn off the console manually (with the facility button)
6. Unplug the console for half-hour, and press its energy button by 30 seconds
7. Reset the controller
8. Plug the controller through USB plug
9. Turn on the PS4
10. Go to Settings
11. Select System Software Update
12. If you see the choice “Update Now,” choose it
13. Press Accept when the update downloads
14. Let this system end.

After you update the console, attempt to cost the controller once more. 

Bear in thoughts that you simply don’t should update the PS4’s controller firmware, not like the Xbox controller.

Change the USB Port

Sometimes, your PS4’s USB port might not be working. To guarantee that is the issue, you may attempt to cost the PS4 on different gadgets, like your laptop.

If it’s not charging on any supply, the issue is on the controller itself, so proceed in direction of the subsequent options.

Change the Cable

Before altering the battery, you could wish to change your PS4 wire. Try a unique cable, and verify the one you’re using for bodily harm.

Charge the Controller Upside Down

It sounds bizarre, nevertheless it helps. You can put the PS4 controller the other way up after which cost it.

This helps as a result of it will possibly clear the mud out of the charging port.

Change the Batteries

Changing your controller’s battery just isn’t as simple appropriately, however you may nonetheless do it your self. You might take it to a service retailer when you don’t have a small crosshead screwdriver or a Phillips head screwdriver as an alternative. You additionally want a pry plastic bar and the correct PS4 battery. 

Here’re the steps: 

1. Use the screwdriver to unscrew all of the screws in the back of the DualShock 4. Keep the screws protected. 
2. Pry open the case with a plastic pry bar. Use the bar to maneuver throughout the controller till the case pops up. 
3. There’s a ribbon cable holding the case collectively. Be cautious when opening the controller.
4. Unplug the battery connector. Twist and switch it to tug it out.
5. Put the brand new battery on the controller. Ensure the ledge of the connector is on the backside. Simply connect the connector pin to the socket.

While the method is straightforward, it is advisable to be further cautious and delicate. And when you’re at it, use a microfiber material to scrub out the mud. 

Here’s a video tutorial:

That mentioned, there’re 5 PS4 controller generations, and batteries are particular to those generations. Check the FAQ for more information. 

Clean the Charging Port

There could possibly be mud or grit within the charging port. It would stop your PS4 controller from charging. 

Use compressed air, a microfiber material, a wood toothpick, an electrical blower, or a cue tip to scrub the world. Then, attempt once more. 

Change the Charging Port

As earlier than, you want both a Phillips Head screwdriver or a small crosshair screwdriver. Also, you want a plastic pry.

1. Unscrew the 4 screws on the back
2. Use the plastic pry to take the case out. Be cautious with the plastic ribbon cable
3. Pull out the plastic ribbons connecting the circumstances
4. Take the higher part of the case
5. Take out the gentle bar by pushing it out
6. Light and take away the 2 items of plastic overlaying the charging port
7. Unscrew the 2 screws holding the charging port
8. Gently elevate the port from its base
9. Put the brand new port in. Ensure it’s dealing with the correct course. Simply slot it into place
10. Put the ribbon cables back into place
11. Put the 2 screws back into place
12. Put the plastic cowl back
13. Slot the sunshine bar back into its socket
14. Assemble the controller once more. Ensure to place the ribbon cable back the place it belongs
15. Put the 4 screws back. 

Here’s a video tutorial:

The charging ports are additionally generation-specific. Check the FAQ for more info.