Recovery Mode Not Working on Mac? Here’s the Fix!

Recovery Mode Not Working on Mac? Here’s the Fix!.

Have you been attempting to repair the Recovery Mode that’s not working in your Mac?

Mac’s Recovery Mode is the go-to troubleshooter for a lot of customers. Whether they’re attempting to restore a tough disk, reinstall macOS, or repair a cussed downside, booting into Recovery Mode is usually an enormous assist. But what if Recovery Mode isn’t working for you? 

There might be completely different causes behind this problem. You could have used an incorrect keyboard shortcut. Perhaps, you’ve by accident deleted the recovery partition. On uncommon events, Recovery Mode is inaccessible as a result of Mac’s disc is past restore. 

Whatever the trigger, we’re right here to assist. We have listed tons of how to resolve this problem and enable you get back to using your iMac or Macbook with ease once more. Here’s how to repair Recovery Mode not engaged on Mac.

Let’s soar in!

1. Do Basic Troubleshooting to Fix Recovery Mode Not Working on Mac.

Sometimes, the Recovery Mode problem is because of a easy error. Maybe, you’ve a defective keyboard or an previous macOS model. Before you progress on to different fixes, it pays to do primary troubleshooting. The strategies under could also be sufficient to resolve your problem.

do basic troubleshootingdo basic troubleshooting

Here are some primary troubleshooting tricks to repair ill-functioning Recovery Mode on Mac:

  • Check in case you have a Mac with a T2 safety chip: It’s environment friendly to make use of a keyboard shortcut in addition into Recovery Mode. Keep in thoughts, although, that Command +R doesn’t work on a Mac with a T2 chip. Got an iMac or Macbook with a T2 chip? Use this shortcut as a substitute: Option/Alt + Command + R.
  • Inspect your keyboard: Ensure that your keyboard isn’t defective. Try to attach an exterior keyboard and kind the proper shortcut in addition your Mac into Recovery Mode. See in case your present Mac keyboard is the issue. 
  • Check your macOS model: Do you’ve a Mac operating on macOS El Capitan or Yosemite? macOS variations older than Sierra don’t have all of the Recovery choices. That might clarify why you couldn’t boot your laptop into Recovery.

2. Check If Your Mac Has a Recovery Partition. 

Macs from 2011 and later have a built-in Recovery Partition. It is a separate part of the exhausting drive that customers can boot into if they should restore disks or reinstall their macOS. They even have Safari that permits you to go surfing and get assist from Apple Support. 

If you all of the sudden can’t boot into the Recovery Mode, you might need by accident deleted Recovery Partition whereas changing a tough drive or reinstalling macOS. Luckily, you possibly can test in case your Mac has Recovery Partition by means of the Terminal app. 

Here’s how to make use of Terminal to test in case your Mac nonetheless has Recovery Partition:

  1. First, launch Finder in your Mac.
  2. Look on the sidebar menu and choose Applications.
  3. Now, click on Utilities after which, choose Terminal.
use terminal app to fix recovery mode not working on macuse terminal app to fix recovery mode not working on mac
  1. On the Terminal window, enter this command:
diskutil listing
  1. You’ll see an inventory of partitions for every disk. Look for one named “Recovery.”
  2. If you don’t see a partition with that identify, don’t fret. You can restore the Recovery Partition by resetting PRAM or updating macOS. Check out the steps under.

Here’s how to reset PRAM to revive a lacking Recovery Partition:

  1. First, shut down your Mac.
  2. Switch it back on after which shortly press and maintain this key mixture: Option + Command + P + R. Wait for about 20 seconds earlier than releasing these keys.
reset PRAM on macreset PRAM on mac
  1. Your Mac will restart. Run the Terminal app or comply with the steps above once more to test in case you’ve efficiently restored the Recovery Partition in your Mac. 

Another option to restore the Recovery Partition is to update macOS. Here’s how to do it:

  1. First, go to the Apple menu. 
  2. Then, choose About This Mac.
  3. Finally, click on Software Update to put in any obtainable updates. 

3.  Activate Internet Recovery as a Workaround.

Were you capable of restore the Recovery Partition or repair your keyboard points? Then, you must now have the ability to boot your Mac into Recovery Mode. Otherwise, strive different choices. One factor to strive is activating the Internet Recovery Mode to reinstall your macOS. 

Newer Macs can boot straight from an web connection, even when the Recovery partition is lacking. Note, nonetheless, that Internet Recovery solely works with networks using WEP and WPA safety. That’s tremendous in case you’re linked to Wi-Fi. If you’re on PPPoE or a proxy network, discover a Wi-Fi network earlier than using Internet Recovery Mode.

Here’s how in addition your Mac into Internet Recovery Mode:

  1. First, shut down your laptop.
  2. Then, press and maintain down this key mixture: Command + Option/Alt + R + Power
  3. Keep on urgent these keys till you see a spinning globe on the display screen. That globe comes with a message about Internet Recovery beginning to launch.
  4. After some time, a progress bar will substitute the globe and message. 
  5. Wait for the progress bar to fill and the macOS Utilities display screen to look. 
  6. Lastly, click on Reinstall macOS. Follow the on-screen directions to finish it. Reinstalling macOS received’t solely restore Recovery Partition but in addition fixes different points which have prompted you in addition into Recovery Mode within the first place. 
fix recovery mode not working on macfix recovery mode not working on mac

4. Create a Bootable Installer Instead.

If your Mac has no Recovery Partition and you may’t entry Internet Recovery Mode, then you definately’re left with one final choice. That is to create a bootable installer. You want a flash drive with no less than 12GB of storage. If the USB flash drive has present information, back them up as they are going to be deleted when you format it to be a bootable installer. 

Also, you want entry to the macOS Install information for the macOS model you wish to reinstall. Open your Applications folder to seek out the Install information. If you possibly can’t discover them, you possibly can obtain them from the Mac App Store earlier than following the steps under.

Here’s how to create a bootable installer:

  1. First, join your USB flash drive to your laptop.
  2. Open Disk Utility.
  3. Then, choose the root drive within the sidebar and hit Erase.
  4. Now, format the drive and choose Mac OS Extended (Journaled) because the format. For the scheme, click on GUID Partition Map.
format bootable installerformat bootable installer
  1. Then, click on Erase once more to finish the formatting of the USB flash drive.
  2. Now, open Finder and click on Applications on the sidebar.
  3. Then, choose Utilities. Find and launch the Terminal app. 
  4. Enter the next command to reinstall Big Sur in your Mac:
sudo /Applications/Install macOS Big Sur.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume

Note: For different macOS variations, substitute “BigSur.app” with “Catalina.app” or “HighSiera.app.” 

  1. When prompted, kind your admin password. Then, enter “y” to proceed wiping the flash drive and turning it right into a bootable installer. 
  2. Lastly, anticipate the method to complete earlier than ejecting the flash drive.

5. Use a Bootable Installer to Fix Recovery Mode Not Working on Mac.

Once you’ve created a bootable installer, you need to use it to reinstall macOS. New macOS set up means your Mac could have a working Recovery partition once more. That ought to have the ability to repair the difficulty of Recovery Mode not working in your Mac. 

Here’s how to make use of a bootable installer to reinstall macOS and restore Recovery Mode:

  1. First, join the bootable installer to your Mac.
  2. Restart your Mac. Then, instantly maintain down the Option/Alt key. Keep urgent till you see the bootable quantity on the display screen.
  3. Now, choose the bootable installer quantity. Then, click on Continue.
  4. Next, the Utilities window will seem. Click Install macOS and hit Continue.
fix recovery mode not working on macfix recovery mode not working on mac
  1. Finally, comply with the on-screen directions to finish the method.

Once the method is full and your laptop is back on, attempt to boot it into the Recovery Mode. See in case you can lastly do it. Also, test the difficulty that has prompted you in addition into the Recovery Mode within the first place. See if it’s already resolved. 

That wraps up this information. Hopefully, one or two of those strategies have helped repair the difficulty of Recovery Mode not working in your Mac. Got different Mac-related issues? Don’t hesitate to go away a remark under. We’ll attempt to deal with these points in our next posts.

If this information helped you, please share it. 🙂

  • Mako YoungMako Young

    Mako is a employees author at Saint. He’s been writing about tech for greater than a decade. When he is not studying in regards to the latest information on Apple, he is busy learning cybersecurity, cryptocurrency, cloud computing, and different IT-related sectors. His distinctive work graces know-how and Apple-related blogs like How-To Geek, VEED.io, Macgasm, onMac, PhotoWorkout, GameRant, and lots of more. He additionally has a Bachelors in Computer Science and has been writing since 2018, with over 400 posts printed.
    LinkedIn
    X (Twitter)

    View all posts



Check out more article on – How-To tutorial and latest highlights on – Technical News, Apple Products