5 Ways To Fix “Preparing To Configure Windows” 

At occasions, throughout boot, your PC takes a very long time to load with a message “Making ready To Configure Windows” on the display. This course of can take a couple of minutes to a number of hours to finish, which leaves you unable to make use of your system to carry out any duties for the length.

This normally occurs when Windows tries to make modifications to your PC by putting in the brand new recordsdata and settings which had been downloaded through the latest update.  Subsequently, uninstalling the update(s) is the go-to resolution to repair it.

Moreover, defective program(s) or broken system recordsdata are additionally doubtless offenders. Let’s focus on the opposite problem-causing options for this problem and their corresponding options by way of this text.

How to Repair Making ready To Configure Windows?

The very first thing you need to do is wait. When your PC is rebooting with this message on the display, Windows is making an attempt to resolve any points throughout the system recordsdata or set up updates. Subsequently, be affected person and wait till this course of is full, and don’t flip off your system.

Nonetheless, if the configuration course of takes a really very long time i.e. greater than 3 hours to finish otherwise you encounter this case often, there will be different points inflicting this error that are listed beneath.

Carry out a Clear Boot

Clear Boot initiates your PC with the least variety of drivers and applications, basically solely those that are required by the system. Subsequently, in case your system is dealing with this error resulting from some defective applications through the start-up, clear booting ought to clear up it. Right here’s the way you do it:

1. Press Windows + R keys to open the Run dialog field.
2. Sort msconfig within the field and press Enter.
   
3. Choose the Providers tab within the System Configuration field.
4. Test the field beside the Hide all Microsoft providers choice.
5. Click on on the Disable all choice and hit Apply.
6. Now go to the Startup tab and click on on Open Job Supervisor.
7. Throughout the Job Supervisor, go to the Startup tab.
8. Disable all apps which have their standing as Enabled.
   
9. Shut the Job Supervisor and press OK earlier than you shut the System Configuration Field.
10. Restart your gadget. 

Your gadget will now begin in a clear boot surroundings. Test whether or not the issue happens or not. If not, then a number of defective program(s) in your system is to be blamed. 

Now, it’s worthwhile to manually discover out which program is inflicting this problem and both disable it throughout startup or take away it. After you load into Windows in Clear boot, go to Providers on msconfig and allow one program that you just had beforehand disabled. Now restart your gadget.

Repeat this course of for every utility individually till you find the defective one. Do the identical course of for startup apps within the Job Supervisor. As soon as you identify the defective utility, both disable or uninstall it.

Uninstall updates

Generally, a problematic Windows update is accountable for preserving your PC in an infinite configure loop. After you carry out an update, Windows will set up the updates through the subsequent start-up section.

Therefore, resulting from points within the update recordsdata or some glitches throughout set up, Windows can take a very long time to finish the configuration and even get caught.

For such a case, uninstall the updates to rejuvenate your laptop. Observe alongside to take action:

For Windows 10,

1. Press the Windows + I keys to open the Settings window.
2. Open Update & Safety and go to Windows Update.
   
3. Click on on the View update historical past.
4. Hit Uninstall updates on the high of the window.
   
5. A listing of all of the updates based on their put in date is displayed.
6. Proper-click on the update and hit Uninstall.
7. Click on Uninstall button within the pop-up to substantiate.
8. Restart your laptop.

For Windows 11,

1. Press the Windows + I key to open the Settings window.
2. Open Windows Update > Update historical past.
   
3. Click on on Uninstall updates to open the listing of current updates.
   
4. Proper-click on the latest update or the one that you just suppose is inflicting issues and choose Uninstall.
   
5. Verify your motion by clicking on the Sure button within the pop-up window.

Run SFC scan

As talked about earlier, corrupt and damaged system recordsdata are additionally one of many doubtless causes of this drawback, because the configuration is the stage when Windows makes use of these recordsdata to make needed modifications to the system.

Subsequently, run the System File Checker (SFC) scan to scan and restore the damaged recordsdata. For this,

1. Sort cmd within the search bar.
2. Proper-click on Command Immediate and choose Run as administrator.
3. Copy-paste or sort sfc /scannow and press Enter.
4. After the method is full, Restart your laptop.

Run the Test Disk system device

The system recordsdata are saved by default within the C: drive inside your Arduous drive. Points throughout the onerous drive trigger file system errors resulting in the principle drawback. So it’s best to have a look at disk errors and rectify them utilizing the chkdsk device. Observe the steps to run it:

1. Sort cmd within the search bar.
2. Proper-click on Command Immediate and click on on Run as administrator.
3. Sort or copy-paste the code and press Enter key
   chkdsk C: /f /r /x
4. A message with the Y/N choice is displayed that mentions checking quantity through the subsequent restart. Press Y and Enter.
   
5. Restart your system.

Now when the system restarts, the disk checking device scans and performs logical repairs to the desired drive, fixing your drawback.

Reset your PC

Resetting your PC will change all system settings to default and take away all updates. Subsequently, this may even take away the defective recordsdata or applications inflicting the “Making ready to Configure Windows” drawback.

Reset removes all apps besides the default ones. You’ve gotten the choice to both delete or keep your recordsdata after the reset. To reset your PC, observe these steps:

For Windows 10,

1. Press Windows + I key to open the Settings.
2. Go to Update & Safety > Recovery.
   
3. Click on on Get began button below Reset this PC.
   
4. Choose whether or not you need to delete or save your recordsdata.
5. Click on on the Native reinstall choice and choose Subsequent.
6. Hit the Reset button on Able to reset this PC web page.

For Windows 11,

1. Press Windows + I key to open the Settings.
2. Beneath System, open Recovery.
3. Click on the Reset PC button below Recovery choices.
4. Select if you wish to keep or take away your recordsdata.
5. Choose Native reinstall > Subsequent.
6. Hit the Reset button to start.

Your PC will restart after a short time and provoke the reset course of. 

Be aware: Use this as your final resort if not one of the above fixes work. Bear in mind to again up your vital recordsdata and notice this system settings.