Liquid Has Been Detected In The Lightning Connector? How To Fix It

iOS units have a function to inform you at any time when it detects any type of liquid within the charging connector. Your iPhone will cease charging to forestall any injury to the cellphone itself. Further, it’s going to keep in that state till you take away the liquid out of your charging connector. 

Although you should use the Override function to bypass this error, there can be a danger of damaging your iPhone.

Clean Your Lightning Connector

If you think that there’s really water inside your lightning connector, it’s best to dry out your cellphone earlier than using it. Follow these steps to correctly take away any liquid residue out of your cellphone connector.

Step 1: Shut Down Your Phone

The very first thing you’ll have to take away the lightning connector and rapidly flip off your cellphone. If there may be water within the lightning port, shutting down your cellphone will forestall the water from inflicting a brief circuit within the cellphone. To shut down your cellphone, maintain the ability button till the ability slider comes up on the display screen. 

Step 2: Remove Excessive Liquid

After turning off your cellphone, make sure that the cellphone itself is dry by dabbing it with a clear fabric or a paper towel outdoors of the charging port. Then, examine if there may be any residue water within the charging port and the lightning connector. You can use a torch gentle to examine contained in the port.

If you discover water contained in the port, it is advisable take away the water from the charging port to let it dry sooner. To take away extra liquid, face the charging port down and gently faucet it in your palm to let the larger drops of water out.

Step 3:  Let Your Phone Dry

The last step is to place down your cellphone in a well-ventilated space to let the moisture within the port dry out. The air ought to dry out any tiny particles of water in 5-6 hours. Also, make sure that to not put your cellphone below direct daylight. After this, flip in your cellphone and plug in your lightning connector. 

If you continue to see the error, there should nonetheless be water within the port. In this case, you’ll have to go away your cellphone out for an extended interval. It might even take the entire day for the moisture to utterly dry out. 

If you suppose there’s nonetheless liquid remaining in your lightning port, we’ve an in depth article on how to correctly take away water out of your lightning port.

Restart iPhone

If you’re positive that there isn’t any likelihood of liquid within the port, the notification could also be a results of a bug or glitches. In this case, you possibly can strive restarting your iPhone to attempt to repair the problem. Restarting will do away with any bugs or glitches which may have produced this error. To restart your iPhone comply with these steps:

1. Hold down the ability button and aspect button till the ability slider exhibits up. 
2. Use the slider to show off your cellphone.
   
3. After the cellphone has utterly shut down, maintain the ability button to show it back on.

You may force-shutdown your iPhone by holding down the ability button for an extended interval.

Change Charger

If it is a recurring problem despite the fact that there isn’t any water in your port, the problem often is the charging cable itself. If you’re positive there isn’t any risk of water contact, your cable could also be broken and must be changed. 

You may use a wi-fi charger to cost your cellphone regardless of the notification. Since wi-fi charging doesn’t use the charging port, a moist charging port may have no detrimental influence in your cellphone.

Emergency Override

Even although your iPhone disables charging whereas the error is proven, it additionally permits you to bypass it by tapping on “Emergency Override”. However, it’s best to solely use the override operate in case of emergencies as moisture may trigger quick circuits in your cellphone and trigger everlasting injury.