How to fix srttrail.txt on Windows 11

There’s nothing more annoying to a Windows person than having to face a blue display error, particularly one that’s accompanied by a system crash. The srttrail.txt error is one among them. Although not technically a BSOD, an error within the Computerized Restore atmosphere remains to be symptomatic of a deeper drawback that’s derailing Windows and would require intervention but.

Right here’s all the things you must know concerning the srttrail.txt error: its causes, doable options, and the previous couple of resorts. 

What’s the srttrail.txt error?

The srttrail.txt textual content file talked about within the message is just a log maintained by Windows of all of the cases when it did not boot correctly, and can proceed to come back up if Windows is caught on boot.

This error message largely happens whereas the system is booting up, however it might probably additionally seem whereas Windows is operational. The one two choices supplied on the display are to both “Shut Down” or use “Superior choices”. The previous isn’t a viable resolution because the error (and no matter’s inflicting it) will most likely nonetheless be there when the PC is turned again on. The latter is the one doorway to completely different options and fixes.

: How to Repair Copy and Paste on Windows 11

What causes the srttrail.txt error on Windows 11?

There are a variety of issues that might go fallacious for this error to happen. A number of the doable causes may contain the next:

• {Hardware} points (incompatible or corrupt {hardware}, drivers, and so forth.)
• Malware or virus infestation
• Putting in corrupt software program
• Corrupted system information
• Corrupted Windows registry
• Broken or corrupted Windows Boot Supervisor information

Any of those points may result in the srttrail.txt error. The ensuing failure may manifest in a wide range of methods as nicely. Aside from receiving the “Computerized Restore couldn’t restore your PC” blue display, you possibly can additionally end up observing a black display that’s caught on “Making ready Computerized Restore” or “Diagnosing your PC”. 

All which means that the automated restore utility is unable to repair the underlying explanation for the error and you can be required to use one of many fixes talked about under to bail your system out. 

: How to Change Brightness on Windows 11 [Step-by-step Guides and Fixes]

How to repair srttrail.txt error on Windows 11

A number of doable causes will necessitate a number of doable options. Listed here are all of the fixes that you must find out about with a view to get your PC again to its practical state once more. 

Repair 1: System Restore

Performing a system restore will revert any modifications made to the gadget, together with settings, system information, drivers, registry keys, and so forth., and return your PC to the state it was in at a previous time. It’s possible you’ll lose a few of your present settings and knowledge, however you’ll a minimum of have gotten out of the error display. 

In case your pc is failing as well and also you solely have entry to the Computerized Restore window with the error, right here’s how to carry out a system restore:

Click on on Superior choices.

Click on on System Restore.

Click on on Subsequent.

Right here, choose a cut-off date to which you need your system to revive. Then click on Subsequent.

Click on End.

Await the restoration course of to complete. If that didn’t remedy the problem, confer with the opposite fixes under.

Repair 2: Smooth Reset your PC: Take away your battery and place it again

For laptop computer customers, the problem can generally be resolved just by taking the battery out, ready for a minute or two, after which putting it again. Though it isn’t probably the most elegant resolution, as a result of the problem is understood to even be brought on by an influence provide overload, resetting the battery can generally do the trick.  

Repair 3: Disconnect non-essential units

For this repair, disconnect all of your peripheral and non-essential units, reminiscent of printers, USB units, cameras, and so forth. Then restart your pc and test if the problem nonetheless persists. In the event you don’t get the error message, then the fault lies with one among these units (and its drivers). Reconnect the peripherals one after the other and restart your system to seek out out the precise offender. As soon as the malfunctioning gadget is discovered, you’ll have to update the drivers. If the driving force update doesn’t work, you might have to get the peripherals repaired or changed.  

In the event you’re unable as well to Windows to update the drivers, confer with the following repair. 

Repair 4: Update System Drivers from Protected Mode with Networking

System drivers may also be up to date from the Computerized Restore error display from Protected Mode (with Networking). Right here’s how to take action:

Click on on Superior choices from the error display.

Go to Startup Settings.

Click on Restart.

Now choose Allow Protected Mode with Networking.

As soon as the system is in secure mode, obtain and update the drivers out of your PC producer’s web site. 

Repair 5: Scan the system for Malware

Being a typical purpose for the Srttrail.txt, virus and malware infestation can solely be rooted out by operating a full scan from the Protected Mode. Right here’s how to go about it:

From the error display, go to Superior choices.

Then choose Startup settings.

Click on on Restart.

Press 4 to allow Protected Mode.

In Protected Mode, Press Begin, sort Windows Safety and open it.

Choose Virus & menace safety within the left pane and click on on Scan choices.

Choose Full scan.

Scroll down and click on on Scan now.

Await the scan to seek out and repair points. Then restart your system to test if the problem is resolved.

Repair 6: Rebuild Boot Configuration Information (BCD) and repair Grasp Boot Report (MBR)

Issues with Boot Configuration Information (BCD) and Grasp Boot Report (MBR) may also be chargeable for the srttrail.txt error. Windows received’t boot up if these are lacking or corrupted. You would need to rebuild the BCD and repair the MBR.

Right here’s how to take action:

Choose Superior choices from the error display.

Click on on Troubleshoot. 

Choose Superior choices.

Then click on on Command Immediate

Right here, sort the next command:

diskpart

Hit Enter. This can open the Diskpart utility. Now, sort the next:

record quantity

Hit Enter.

Right here, you will notice your disk partition sort. 

In the event you see any FAT32 (Fs) partition, your system is UEFI based mostly. If all of the partitions are labeled NTFS, yours is a BIOS/Legacy based mostly system. Each of those would require completely different command directions. 

UEFI System Instructions

For the UEFI methods (FAT32 partition), be aware of the amount quantity and the drive letter that holds the working system. Then sort the next command:

choose quantity 'X'

Substitute ‘X’ with whichever quantity Windows is put in in.

Press Enter.

Then assign a brand new letter to this. To take action, sort the next:

assign letter=Z

Be sure to assign a letter that’s not being utilized by the system.

Press Enter.

This can assign the letter “Z” to the chosen quantity.

Now sort exit and press Enter to shut the Diskpart utility. 

Now, to repair BCD, sort the next within the command immediate:

bcdboot C:Windows /s Z: /f ALL

Make sure that to interchange the letter ‘C’ with the place Windows is put in. Press Enter.

When you get affirmation that boot information are efficiently created, shut the command immediate and restart your system to test if the srttrail.txt error is resolved. 

BIOS/Legacy System Instructions

For these with BIOS/Legacy based mostly methods, right here’s what to do:

Shut the diskpart utility whether it is nonetheless open. 

Then sort the next command:

bootrec /fixmbr

Hit Enter.

Then sort the next:

bootrec /fixboot

Hit Enter. Lastly, sort:

bootrec /rebuildbcd

Hit Enter. As soon as the operation is accomplished efficiently, shut the command immediate, restart the system and test to see if the problem is resolved.

Repair 7: Run SFC and Verify Disk (CHKDSK) Command

Working the System File Checker and Verify Disk utility will restore corrupted system information that may be inflicting the error. To take action, comply with the steps under: 

Select Superior choices.

Then Command Immediate.

Within the command immediate, sort the next command:

sfc /scannow

Then hit Enter.

Await the scan to complete. 

Shut the command immediate and restart your PC for the restore modifications to take impact.

If that doesn’t work, open the Command immediate once more (as proven earlier) and kind the next:

chkdsk /f /r /x C:

Press Enter. 

Await the scan to complete, then shut the Command Immediate and restart the PC to see if the issue nonetheless persists.

Repair 8: Disable early launch anti-malware safety

Disabling the early launch anti-malware safety also can do the trick. Right here’s how to go concerning the course of:

Click on on Superior choices from the Windows Recovery atmosphere. 

Then choose Startup Settings.

Click on on Restart.

As soon as the pc restarts, you’ll get a listing of Startup choices. Right here, choose Disable early launch anti-malware safety by urgent the (quantity) key.

Restart your PC to see if the problem is resolved. 

Repair 9: Disable Computerized Startup Restore

It’s doable that the Computerized Startup Restore window is the reason for the issue itself. If different issues haven’t labored out to date, that is the following repair to check out.

From the Windows recovery atmosphere, click on on Superior choices.

Then choose Command Immediate.

Right here, sort the next command:

bcdedit /set {default} recoveryenabled No

Then press enter.

As soon as the operation is accomplished efficiently, shut the command immediate.

Restart the PC to test if the repair has labored for you. In any other case, transfer on to different fixes. 

Repair 10: Verify and repair the System Partition

The srttrail.txt error also can happen in case your gadget partitions don’t have the right values. Right here’s how to repair that:

From the error display, click on on Superior choices.

Then choose Command immediate.

Kind Bcdedit and press Enter.

In the event you see the gadget worth as partition=C:, then its worth is about accurately.

If not, then sort the next command:

bcdedit /set {default} gadget partition=c:

Then press Enter.

Now sort this command:

bcdedit /set {default} osdevice partition=c:

Press Enter.

Shut the command immediate and restart your PC. Does that resolve the problem? If not attempt the next strategies.

Repair 11: Verify Boot Precedence in BIOS

Improper configuration of boot precedence also can result in the error in query. This could occur in case you have a number of arduous disks or have put in new ones just lately. The primary boot precedence needs to be the arduous disk the place Windows is put in. To test if that is the case, comply with the steps under:

Click on on Superior Choices.

Select UEFI Firmware Settings.

Click on Restart.

Now, you’ll get a Startup menu that can have the choice to vary boot gadget choices. Be aware that this display might differ based mostly in your PC producer. Press the important thing that can lead you to Boot Setup.

As soon as within the BIOS, transfer to the “Boot Choices” tab with the arrow keys. 

Now, beneath “Boot order”, choose your arduous drive or the OS boot supervisor and make it the first boot possibility. 

Now, transfer to the “Exit” tab. Go to Save and Exit and hit Enter.

Restart the gadget to see if the problem is resolved.

Repair 12: Disable Safe Boot

Disabling safe boot is touted as one of many fixes on numerous neighborhood pages and blogs and, thus, needs to be thought of a viable possibility. Right here’s how to take action.

Enter the BIOS (as proven within the earlier methodology) and go to Boot choices.

Discover Safe Boot and hit Enter on it. Then choose Disable and hit Enter.

Relying in your PC producer, this selection may also be beneath the “Safety” settings.

As soon as disabled, save the settings and exit BIOS.

Verify if the problem is resolved by restarting the PC.

Repair 13: Disable Driver Signature Management

The driving force signature management characteristic in Windows 11 ensures that solely the correct drivers are loaded. If Windows finds any issues with the gadget drivers, it might probably result in issues such because the one in query. Right here’s how to disable driver signature management.

On the Computerized restore display, click on on Superior choices.

Then choose Startup settings.

Right here, choose Disable driver signature enforcement by urgent 7.

If Windows begins and also you don’t see the error once more, you’ve gotten discovered the reason for the issue. The subsequent step is to completely disable driver signature enforcement. Right here’s how:

Press Begin, sort cmd, right-click on Command Immediate, and choose Run as administrator.

Now sort the next command:

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS

Hit enter. Now sort the next command:

bcdedit -set TESTSIGNING ON

Hit Enter. Now shut the command immediate and restart your pc.

Repair 14: Reset your system

When all else fails, resetting your system is without doubt one of the final resorts that you need to go to. From the Windows Recovery Surroundings, click on Superior choices.

Then select Troubleshoot.

Choose Reset this PC.

Right here, select Keep my information.

Select Native reinstall.

Click on on the Reset button and await Windows to complete its job.

Repair 15: Reinstall Windows

Lastly, if nothing works, and also you’re on the finish of your tether, sadly putting in a contemporary copy of Windows is the one possibility left.

To reinstall Windows, you’ll first have to create a bootable USB gadget on a special pc.

Now we have an entire information on how to make Windows 11 bootable USB you can confer with for a similar.  

After you have the bootable USB, plug it in and go to Superior choices from the Startup Restore error window.

Click on on Troubleshoot.

Then click on on Superior choices.

Choose UEFI Firmware Settings.

Click on on Restart.

On the following display, choose Boot System choices by urgent the corresponding key.

Choose your USB gadget with the arrow keys. Then press Enter.

As soon as Windows Setup begins, click on Subsequent.

Then comply with the on-screen prompts to proceed the set up.

So these had been a few of the options for the problematic srttrail.txt error displayed on the Computerized Restore display when your pc fails as well up. We hope that you just had been in a position to repair your PC with one of many many options provided right here. Till subsequent time.