How To Fix “There Was A Problem Sending The Command To The Program”?

The “There was a problem sending the command to the program” error happens when Excel can’t course of your command to open your file. This may very well be as a result of there may be an current program course of that doesn’t permit Excel to carry out this motion. When you encounter this problem, Excel will fail to open your program file.

In this text, we can be guiding you your method via this problem. We have talked about the checklist of potential causes with viable options you can try by yourself, so keep studying!

What is “There was a problem sending the command to the program” in Excel?

How to Fix “There was a problem sending the command to the program”?

The options fluctuate relying on the character of the trigger you’ve handled, so we propose you undergo the checklist of causes we’ve talked about earlier than shifting on to the options. 

The options can vary from enabling the Dynamic Data Exchange between Excel and different applications to disabling {hardware} acceleration, based on your problem. For all the problems mentioned above, seek advice from the options most related to you on this part.

Enable Dynamic Data Exchange(DDE)

While configuring the Excel choices, you can’ve disabled the Ignore different functions that use Dynamic Data Exchange (DDE) possibility. File explorer sends a DDE message to Excel requesting to open the Excel file. When this feature is enabled, Excel will ignore File Explorer’s message to open the file and therefore, set off this message.

You can simply resolve this problem by revisiting the Excel Options in your Excel program. Refer to the next steps to allow the DDE possibility:

1. Launch MS Excel.
2. From the homepage, head to the sidebar to pick Options.
   
3. Select Advanced from the panel to your left.
4. Under General, deselect the field next to Ignore different functions that use Dynamic Data Exchange (DDE).
   
5. Click OK.

Restore Default File Association

An incompatible file affiliation may be the wrongdoer behind the “There was a problem sending the command to the program” problem. You might want to reset the file affiliation to default after which attempt to open your Excel file once more. Refer to the next steps to revive the default file affiliation of your Excel file:

1. Open File Explorer, then navigate to the placement of your file.
2. Right-click in your Excel file.
3. Hover over Open with then choose your model of the Excel program.
   
4. Select Always use this app to open .xlsx information.
   
5. Click Open.

Disable Add-ins

Although add-ins are purely for comfort’s sake, sure third-party add-ins may cause battle between the Excel program and its information. You can disable the add-ins you watched are creating this problem from the Excel Options in this system itself. 

Refer to the next steps to disable the add-ins from MS Excel:

1. Launch MS Excel.
2. From the sidebar, choose Options.
   
3. Choose Add-Ins from the sidebar.
4. Next to Manage on the underside, choose the drop-down menu, then select COM Add-ins.
   
5. Select the Go button.
6. Deselect the field next to the Add-In you want to disable.
   

Repeat these steps for all add-ins to find the Add-In that’s inflicting this problem.

Repair Office Program

There may very well be a difficulty along with your Office program that’s inflicting you this problem. The problem is anxious with lacking or corrupted program information. You can simply resolve this problem by repairing your Office program from Command Prompt. 

If you want to restore your Office utility, comply with these steps:

1. Launch Start, then enter Control Panel to open the utility.
2. Under Programs, choose Uninstall a Program.
   
3. Locate, then right-click in your office utility.
4. Select Change.
   
5. Choose Online Repair, then click on Repair on the dialogue field.
   

Turn Off Hardware Acceleration

You might have turned on {hardware} acceleration that may very well be inflicting points with Excel operating your command. Hardware acceleration usually assists customers in operating graphic-intensive duties. However, in case your graphics card driver runs into an issue, Excel can run into the same problem.

Follow these steps to disable {hardware} acceleration in Excel:

1. Open the MS Excel utility.
2. From the sidebar, navigate to Options.
   
3. Head to Advanced.
4. Scroll right down to the Display part and choose the field next to Disable {hardware} graphics acceleration.
   
5. Select OK.

Update System

An outdated system will be the wrongdoer behind the “There was a problem sending the command to the program” in MS Excel. When you don’t update your system, it can have points in its regular functioning.

You can update your system from the settings utility in Windows. Refer to the next steps to update your working system:

1. On your keyboard, hit the Windows key + I to open the settings app.
2. From the navigation panel to the left, choose Windows Update.
3. Select the Check for updates button; set up if any.