How To Fix Canon Printer Error 5200? 5 Proven Ways

Almost all printers right this moment use the Cyan, Magenta, Yellow, and Black (CMYK) shade mixture to generate the printouts, and the Canon printer is just not an exception.

However, in case your Canon printer runs out of any of those ink, the printhead overheats and stop to perform correctly. In order to guard the printhead from additional harm, the printer stops printing and throws printer error 5200. In addition, you will see the ability mild and alarm mild flashing on the printer.

Besides, you might also face the 5200 error when the ink path of the printer is interrupted on account of a blocked printhead or improper set up of the cartridge.

Note: As advised within the error window, restart the printer earlier than transferring to different fixes mentioned beneath. Sometimes a easy restart might resolve the problem with out additional hassles.

Refill the Ink

You ought to by no means let the ink in your printer go too low if you wish to keep away from errors whereas printing.

If you’ve gotten seen ink tanks or ink cartridges which might be simply accessible, it’s possible you’ll visually verify the ink ranges. Otherwise, that you must use the upkeep instruments from Canon.

If you’re working low on ink, refill the ink tank or change the cartridge accordingly.

1. Go to the View units and printers part of the Control Panel.
   
2. Locate your Canon printer and right-click it.
3. Choose Printing preferences.
4. Go to Maintenance > Nozzle Check.
   
5. Click Print Check Pattern.
   
6. Click OK.
   
7. Compare the printout with the sample verify image in your display. You will know which shade must be refilled after it.
   
8. Fill the ink tank or change the depleted ink cartridge accordingly. Only use the Canon real ink. It will resolve the error.
9. If you face the 5200 error even when attempting to print the nozzle verify sample, it signifies a deadly state the place your printer has virtually no ink. Refill the ink instantly.

Please observe that issues can get a bit advanced in case your printer has ample ink however nonetheless throws a 5200 error. Move to the fixes beneath to unravel this error in such instances.

Reinstall the Cartridge

The 5200 error may also symbolize a cartridge set up error. If you lately put in a cartridge and confronted the error, there’s a excessive probability that you haven’t put in the cartridge accurately.

Probably, you forgot to take away the skinny plastic protecting movie on the cartridge earlier than set up. It prevents the cartridge detection system from detecting the cartridge.

Check it and take away the movie if it has not been eliminated already.

Besides, when you didn’t set up the Canon real cartridge or put in an previous, used, or counterfeit cartridge, the printer refuses to print and throws the error. So all the time use new and real Canon ink cartridges.

Try putting in a brand new cartridge if the cartridge has sufficient ink, however the printer is exhibiting the 5200 error. Installing a brand new cartridge may even assist when you harm the ink cartridge throughout set up or have a faulty cartridge.

Reset the Printer

You may also reset your Canon printer to repair any glitches within the printer logic board which might be inflicting the 5200 error.

1. Turn off your Canon printer.
2. Push the Stop button on the printer and maintain it for about 3 seconds.
3. While you’re at it, keep holding the ON button.
4. Then let go of the Stop button.
5. Push the Stop button consecutively 5 occasions.
6. Pull up your fingers from the printer now.
7. You will see your Canon printer turning on with a clean display.
8. Turn off the printer.
9. Power on the printer after a couple of seconds.

Clean the Printhead

Another possible trigger for a 5200 error is a blocked printhead. The printhead can get blocked both on account of ink residues or overseas supplies like paper mud.

When something prevents the printhead from spraying the ink, you encounter the 5200 error in your Canon printer.

You can run the automated head cleansing course of from the upkeep device built-in into the Canon printer driver.

1. Go to the View units and printers part of the Control Panel.
   
2. Locate your Canon printer and right-click it.
3. Choose Printing preferences.
4. Go to Maintenance.
5. Run the Cleaning cycle and Deep Cleaning cycle one after the other.
   
6. If out there, additionally run the Ink Flush cycle.

If you’re nonetheless dealing with the error after computerized head cleansing, open the cartridge entry door of the printer and take away something that’s blocking the printhead from transferring. Then proceed with the guide head cleansing course of.

Seek Professional Help

If something mentioned within the put up didn’t show you how to resolve the 5200 error, there may be in all probability a faulty printhead in your printer or faults within the cartridge detection system.

If you’re comfy working with the interior a part of the printer, it’s possible you’ll buy a substitute printhead and set up it in your printer.

Otherwise, I like to recommend you are taking skilled help or contact the service heart.