Brother Printer Not Printing? Here’s How To Fix It

If your Brother printer will not be printing, it’s in all probability offline as a result of a connection problem. As a end result, the printer can’t talk along with your pc and finally fails to print.

Similarly, your Brother printer can cease printing if the print queue is overloaded with print jobs. In such instances, it’s best to wait until the pending jobs get accomplished earlier than beginning one other print.

In addition, crashed spooler service or corrupted printer drivers may additionally stop your printers from printing.

Check Printer Status

Whenever your Brother printer will not be printing, it’s best to first begin by checking the printer’s connection standing.

If you might be using a USB or LAN cable to attach the printer, attempt altering the cables and ports. Be aware to not use unnecessarily lengthy cables. Brother recommends using cables lower than 2 meters and making a direct connection between the printer and pc relatively than using USB hubs.

Similarly, reconnect your Brother printer to Wi-Fi if you’re using it in wi-fi mode. Verify the sign energy of your Wi-Fi connection and ensure nothing is interrupting the sign reception.

If you might be on a dual-band router, join your device and printer to the two.4GHz band for higher sign reception and stability.

Moving additional, test the printer’s standing. Start by checking if the printer is in sleep mode. Press the ability button on the printer to wake it from sleep mode.

If your printer incessantly enters sleep mode and interrupts you from printing, you may undergo this information on how to show off sleep mode on Brother printer.

After that, test if any error messages are flashing on the printer’s display. Printers usually throw an error if they’re out of paper, encounter paper jam, or low on ink/toner ranges. Make positive all these components usually are not stopping you from printing.

Reset Printing Services

After you confirm every part is okay with the printer standing, I recommend you reset all of the printing providers in your Windows PC. It contains clearing the caught print jobs within the queue and restarting the spooler service.

1. Search Command Prompt in your pc, right-click it and faucet Run as administrator.
   
2. Click Yes.
3. While you might be at it, copy-paste these instructions and hit Enter after every of them.

• web cease spooler
• del %systemrootpercentSystem32spoolprinters* /Q
• web begin spooler
• exit

Reinstall Drivers

Your Brother printer might fail to work if you’re using an incompatible printer driver. So first, go to Brother’s official web site and obtain drivers on your printer. Once you put in the drivers, attempt printing once more.

If you have already got drivers put in in your PC, I like to recommend you reinstall it. Reinstalling will assist repair the corrupted printer drivers. While you might be at it additionally, you will repair port mismatch points.

1. Open Windows Settings.
   
2. Click the Bluetooth & units menu first. Then click on Printers & scanners.
   
3. Choose the problematic printer.
   
4. Click Remove > Yes.
   
5. Once the device is eliminated, click on on the Add device button. Then faucet Add manually.
   
6. Check the field next to the highlighted possibility > click on Next.
   
7. Choose the right port utilized by your printer. I’ve linked my Brother printer using USB. So, I will likely be choosing USB001.
8. Click over the printer driver file > Next.
   
9. Check this selection > Next. It will reinstall the motive force.

Use Static IP

By default, each device on a network makes use of DHCP IP to connect with the router. However, IP assigned by the DHCP server expires after a sure time interval (lease time) and after the expiration, the router assigns a brand new DHCP IP to the printer.

As such, the pc can’t discover the printer on the IP used beforehand so as to add the printer to the pc.

In such instances, your Brother printer fails to obtain the print command from the pc. So I like to recommend you to make use of static IP with the printer as a substitute.

1. First, join your Brother printer to a Wi-Fi network.
2. Then open the router portal and seek for a time period that reads like DHCP Address Reservation and open it. The time period might differ relying in your router producer. Please seek the advice of the producer’s web site or the printer’s consumer handbook to know more about it.
3. Once you might be at it, reserve an IP on your printer.
4. Now open your pc’s Settings.
   
5. Tap Bluetooth & units > Printers & scanners.
   
6. Click on the Add device > Add manually button respectively.
   
7. Check the highlighted possibility.
8. Type the IP deal with > Next.
9. Wait until the printer will get added to your PC.