Black Screen Of Death Error In Xbox One / Xbox Series

The Xbox Series or Xbox One Black Screen of Death is a transparent signal of injury. There’re methods to repair it, although, and we’re protecting all the things it’s essential to know to revive your console. 

In abstract, the “Black Screen of Death” is an error that outcomes from energy glitches and bugs. However, if the console doesn’t get previous it after a reset, it means the console has the incorrect configurations. 

It’s a standard downside on the Xbox Series or Xbox One, nonetheless. Xbox Insider members are additional weak to bugs and glitches, sadly.

Reasons For The Fix Xbox Series / Xbox One Black Screen of Death

How To Fix Xbox Series / Xbox One Black Black Screen Of Death?

You might have an additional USB flash drive or exterior drive, empty, and 4GB of house. Lastly, you’ll want a Windows laptop with an web connection to obtain the Xbox manufacturing facility reset file. Finally, you have to be able to lose your information.

We’ll begin with the simple fixes after which transfer in direction of superior options. Bear in thoughts the Xbox One and the Xbox Series have the identical consumer interface (UI) and software program. Therefore, they’ve the identical points and troubleshooting.

Power Cycle the Console

Before transferring in direction of a manufacturing facility reset, you need to strive a tough reset of the console:

1. Hold down the Xbox button on the entrance for 10 seconds to show the console off.
2. Unplug all of its cables for half-hour
3. While you’re at it, maintain the ability button for 30 seconds to empty its energy
4. Plug all the things back on after half-hour
5. Press the Xbox button on the controller to show it back on 

If it doesn’t work, go forward with the follow-up options.

Disconnect the Console From Xbox Live

The Xbox Series or Xbox One black display of demise comes when the console fails to hook up with on-line servers. So, ignoring the connection might clear up the problem and deal with all the things usually.

However, it is a non permanent answer. Once you’re on this state, you’ll have to carry out an offline update of the time. However, you may nonetheless play your video games.

Here’s how to do it, however solely assuming that your complete display is just not black:

1. Turn in your console.
2. Press the Xbox button to open the information
3. Go to Profile & System
4. Go to Settings
5. Go to General
6. Go to Network Settings
7. Select Go Offline

RT + Y

We’ll proceed with a fast tip we regularly discover in Reddit. In explicit, we’re refreshing the dashboard along with your Xbox controller. 

1. Power cycle the console
2. Turn in your console.
3. Wait till you see the pins transferring in your display.  
4. Press RT + Y in your controller concurrently. It gives you management of the console.
5. Pres RT + LT + Y concurrently. It will refresh the dashboard and the shop. Additionally, it could restart the console. 
6. After it restarts, press the Xbox button rapidly and go to a different tab, away from the dashboard.
7. Go offline. You may also disconnect the etherned cable, or flip off the WiFi
8. Disconnect your exterior drives and plug them back in 

This ought to deliver all the things back to regular. You might have to do a manufacturing facility reset or an offline update if it doesn’t.

Factory Reset the Xbox From the Console

No matter the trigger, a manufacturing facility reset can clear up the problem. If you may entry the Xbox’s menu, right here’re the steps: 

1. Turn on the console
2. Press the Xbox button, and rapidly go to Profile & System
3. Go to Settings
4. Go to System
5. Go to Console Info
6. Select Reset console

The Xbox will ask you to maintain your information and apps or reset all the things.

Factory Reset the Xbox With Black Screen of Death

If the console solely exhibits a black display, you want additional steps to manufacturing facility reset the Xbox One or the Xbox Series.

Through this course of, you’ll lose all information. That consists of video games you downloaded, synced accounts, gadgets, and saved information. Yet, Microsoft shops save information, trophies, and related on the cloud, so you may get that back when you re-download the video games.

The first step is getting an additional drive with at the very least 4 GB of house and your Windows PC. 

1. Insert your exterior drive or USB drive into your Windows laptop
2. Open File explorer
3. Go to This PC
4. Right-click on the drive and choose format
5. Select the NTFS choice and click on Start
6. Wait till the method finishes

This course of will wipe your drive clear. Please ensure you save its information elsewhere. 

The next step is downloading the Xbox manufacturing facility reset file: 

1. Put the drive into your PC
2. Download the Xbox Reset Factory Default file in your PC.You can test this official tutorial to obtain it.
3. Select “Save“
4. Open a brand new folder, and put “Factoryreset.zip” on the brand new folder
5. Right-click the zip file, and choose “extract here.” Press Okay.
6. The extract course of will copy the $SystemUpdate into your folder. Copy this file into your exterior drive. There must be no different recordsdata on the storage.
7. Safely eject your exterior drive.

Lastly, we’re using this file to manufacturing facility reset your Xbox One or Xbox Series console. Here’re the steps:

1. Unplug the console’s network cable for those who’re using one
2. Power off the Xbox
3. Unplug the ability twine, look forward to 30 seconds, and plug it back in
4. Plug your exterior USB drive into the console. 
5. Press and maintain the Pair button and the Eject button on the console concurrently. It brings up the Xbox Start troubleshooter.
6. There’s no Eject button on the Xbox One S All-Digital or Xbox Series S. Instead, you’d must concurrently press the Pair button on the console and the Xbox button in your controller. 
7. Hold the buttons for 15 seconds. You ought to hear two power-up tones after 15 seconds. Otherwise, the method is just not working. Additionally, for those who hearken to sounds akin to “powering down,” it failed as properly.
8. Release the buttons after the second beep.
9. Remove the flash drive after the console restarts. The restart might take a number of minutes. Also, for those who’re using a wired connection, plug the network cable back on. 
10. When the console begins, it’s going to information you thru resetting the console. 

As for the place are the buttons on the Xbox consoles:

The Xbox One’s Pair button is on the entrance left, beneath the ability button. Then, the Eject button is correct next to the disk tray.

The Pair button is on the entrance, next to the USB port on the Xbox Series. Then, the Eject button is above the disk drive on the Xbox Series X.

Lastly, on the Series S, the Pair button is at one of many sides, next to a USB port.

The Pair button is the one you employ to sync your controllers.

Update the Console Offline

Assuming you may’t see the display, it’s possible you’ll have to update your console offline. As I mentioned above, a failed update might trigger the issue.

An offline update is just like manufacturing facility resetting the console. However, you want 6GB of house in your exterior drive this time.

1. Plug your exterior USB drive in your Windows laptop
2. Format the drive to NTFS format
3. Download the right system update file. Check above to seek out the one you want.
4. Right-click the file and extract it in your laptop
5. Copy its $SystemUpdate to your drive
6. Safely unplug the drive out of your laptop
7. Power off the console, unplug its energy twine and look forward to 30 seconds
8. Press and maintain the Pair and Eject button on the console concurrently. If there’s no Eject button, press and maintain Pair and the controllers Xbox button
9. Hold the buttons for 15 seconds till you hear two beeps.
10. The console will energy up and go to the Xbox Startup Troubleshooter
11. Plug the USB drive into the Xbox
12. Select Offline system update. The choice gained’t be energetic for those who don’t put the drive with the file on the console
13. The console will update and restart. It might take a number of minutes. If you’re using a wired connection, please join the ethernet cable into the console. 

After the update, the console ought to return to the house display. You can take away the USB drive. 

If you’re getting an error like above, it’s essential to carry out a manufacturing facility reset or take your Xbox to service. Or it means you chose the incorrect system update file.

Try choosing the troubleshoot choice from the menu.

Factory Reset the Xbox With the Troubleshooter

You can strive resetting the Xbox to default through the use of its troubleshooter. 

1. Power off the console
2. Unplug the ability twine for 30 seconds, and plug back in
3. Press and maintain the Pair and Eject button. As you already know, it might be the Pair and Xbox button on the controller (Xbox Series S and Xbox One S All-Digital Edition). 
4. Hold the buttons for 15 seconds till you hear a second beep
5. The console will go to the Startup Troubleshooter.

If the display continues to be black, strive the answer above. Otherwise, choose the choice Reset this Xbox. It will will let you select to Keep video games and apps whereas erasing corrupted information. 

If you don’t take away your entire information, you’ll need to proceed with an offline or on-line update. Otherwise, the console will return to the house display and information you thru setting the device back up.

Reset the Resolution Settings

The next answer is performing a chilly boot and resetting the decision.

1. Turn off the console
2. Unplug its energy and HDMI cable
3. Unplug the HDMI cable out of your TV
4. Wait for 30 seconds
5. Plug each cable back
6. Hold the ability button of your console for ten seconds. Then, flip the Xbox back once more. It performs a chilly boot and clears the console’s cache.

To decrease the show settings, right here’re the steps:

1. Remove the disk from the Xbox, if there’s one
2. Press and maintain the Xbox button on the console for 5 seconds. It will flip off the console. 
3. Press and maintain the Xbox button and the Eject button concurrently for ten seconds till you hear a beep. It will boot the console at 640 x 480 decision.

There shouldn’t be a black display downside if the decision was the issue anymore. So, now you can go forward and alter the decision once more.

Bear in thoughts it ought to match your TV’s decision. Yet, the Xbox One and the Xbox Series have an choice to detect it mechanically. Here’re the steps:

1. Press the Xbox button to open the information
2. Go to Profile & system
3. Go to Settings
4. Select Display & sounds
5. Go to Video Output
6. Go to TV Resolution
7. Choose the automated choice

Enable 24Hz Output Option

You could also be getting the black display of demise whereas watching Blu-Rays. To repair the problem, it’s possible you’ll have to allow the 24Hz choice.

Here’re the steps:

1. Turn in your console
2. Press the Xbox button on the controller to open the Guide
3. To go Profile & System
4. Go to Settings
5. Go to Display & sound
6. Select Video output
7. Inside the menu, choose Enable 24Hz

Last Ditch Try

If all else fails, you’ve got two ultimate choices, the final resort.

First, get a brand new HDMI cable. But earlier than that, strive the cable along with your PC or their gadgets, and see if it really works.

The second strive is, sadly, taking your Xbox to service. There’s nothing else we will do.