6 Ways To Fix 0x80300024 Error In Windows

If you strive putting in Windows on a disk or partition that doesn’t assist it, you’ll get one of many following error messages with the identical error code:

• “We couldn’t install Windows in the location you chose. Please check your media drive. Here’s more info about what happened: 0x80300024”
• “Windows is unable to install to the selected location: Error: 0x80300024”

These errors often occur due to the incompatibility of the set up media with the present boot mode and the present partition scheme. 

Windows can boot in UEFI or Legacy boot mode which correspond to GPT and MBR partition schemes respectively. Currently, most strategies will create a GPT suitable Windows set up media, however an previous set up media should still goal an MBR-based system.

These media will solely set up Windows with the suitable boot mode and partition, so that you must troubleshoot such conflicts to resolve the problem.

Apart from the boot mode incompatibility, {hardware} causes also can trigger the above error.

Change SATA Mode

Your BIOS or UEFI settings additionally assist you to specify the SATA configuration mode, which determines how your system communicates with the SATA gadgets.

Depending in your state of affairs, the SATA device or Operating System construct you want to set up will not be suitable with a configuration mode. You’ll want to vary the mode in such instances.

1. Power up or restart your pc. Then, keep urgent the BIOS key repeatedly till you boot to the BIOS/UEFI settings. If you don’t know which key it’s, examine official sources for the knowledge.
2. Look for SATA Configuration Mode or the same setting. You’ll often discover it beneath Advanced or Storage tabs.
3. Change the setting to a different possibility.
   
4. Save the BIOS and exit.
5. Try putting in Windows once more. If you continue to encounter the error, repeat the above steps to vary to different choices and examine once more.

If all of the modes present the error, set the SATA mode to AHCI if you wish to set up a more recent OS and IDE in any other case. Then, transfer on to the following resolution.

Check Boot Mode and Delete Partition

You can’t set up Windows that targets a GPT disk (UEFI mode) on an MBR disk and vice versa as they’ve incompatible partition tables. Both of those require separate varieties of reserved partitions as effectively. 

Your present boot mode additionally must be UEFI for the set up to work. Otherwise, you’ll get the above error message.

To resolve the problem, that you must change the boot mode after which delete all of the partitions on the disk. Doing so will create an unallocated area and permit the set up course of to create the GPT-based partition information and reserved partitions using this area.

Note: Reinstalling Windows on a disk that already incorporates a earlier Windows set up with out deleting the partitions creates a Windows.previous backup of earlier system, software and Windows recordsdata. So, in the event you don’t need to delete the partitions, that you must create a suitable set up media or convert your partition scheme (see the following two options).

1. Boot into the BIOS.
2. Search for Boot mode or the same setting. You will possible discover it beneath Boot or Advanced tabs.
3. Make certain it’s at UEFI (not UEFI + Legacy).
   
4. Save the adjustments and exit the BIOS.
5. Boot using the set up media once more.
6. Get to the Custom Install Windows Setup display screen whereas following the on-screen directions.
7. Here, search for the variety of the drive the place you need to set up Windows.
8. Select all partitions of this drive and click on Delete > OK.
   
9. Select the unallocated area and click on New > Apply > OK.
10. It ought to create a couple of partitions beneath the identical drive (Recovery, System, MSR and Primary).
11. Select the Primary partition and click on Next.
12. Follow the on-screen directions to undergo the remainder of the set up course of.

Properly Recreate Windows Installation Media

If you don’t want to delete the present partitions, you possibly can strive recreating the set up media that’s suitable along with your partition scheme.

Since media creation instantly creates a GPT-compatible USB set up media, I like to recommend using apps like Rufus for this goal as they permit customizing this course of.

1. Download Rufus in your pc. You don’t want to put in it.
2. Then, obtain media device creation from the Windows Software obtain platform and run this program.
3. Accept the license agreements.
4. Tick Create set up media (USB flash drive, DVD, or ISO file) for an additional PC and hit Next if the choice is there.
   
5. If you’re working this program within the system you’ll be reinstalling, examine Use beneficial choices for this PC and click on Next. Otherwise, uncheck the choice, specify the correct configuration and click on Next.
6. Select ISO file after which Next.
   
7. Specify the save location for the .iso file and click on Save > Finish.
8. Insert a USB flash drive into the pc and open Rufus.
9. Under Device, choose your USB flash drive.
10. Click on SELECT, navigate to the .iso file, choose it and press Enter.
    
11. Select the Partition Scheme in keeping with your system (MBR or GPT).
12. Set the File system to FAT32 and alter another choices per your want.
13. Hit START.
    

After creating the set up media, use it to put in Windows.

Note: You also can strive using one other USB port on the pc to attach the set up device. For instance, when you have this error on a USB 3.0 port, strive using a USB 2.0 one as a substitute.

Convert to GPT

Another means you possibly can deal with this partition scheme incompatibility with out deleting the partitions is by changing the present scheme. I like to recommend changing MBR to GPT even with out such a necessity. You gained’t lose any information throughout this course of.

On the opposite hand, since GPT is the present customary, it’s higher to not convert it to MBR. Doing so additionally deletes all the information inside, so it is going to present the identical end result as deleting the partitions anyway.

To convert to GPT, 

1. Log in to your consumer account and open Run (Windows key + R).
2. Type cmd and press Ctrl + Shift + Enter to open the Elevated Command Prompt.
3. Type mbr2gpt.exe /Convert /AllowFullOS and press Enter.
   

If you possibly can’t log in to the account, 

1. Boot into the set up media and press Shift + F10 on the Install display screen. It will open the Command Prompt.
2. Here, enter the command mbr2gpt.exe /Convert

Note: These instructions will have an effect on the system disk by default. You have to specify the disk quantity with the /disk: attribute to decide on another disk. But for such instances, it’s higher to delete the partition as a substitute since you’ll nonetheless be formatting the disk.

Remove Other Storage Devices

A PC incorporates many SATA ports and every one is numbered, often ranging from 0. Some older motherboard BIOS take into account the storage device related to the primary SATA port because the default OS device. So, in the event you strive putting in the OS on one other port’s device, it’s possible you’ll get this error.

Other than that, when you have put in a number of storage gadgets in your pc, it’s possible you’ll get conflicts whereas attempting to put in Windows on sure port’s gadgets.

If your motherboard has an M.2 port and you’ve got an M.2 SSD, I extremely suggest using it to put in Windows.

Otherwise, you will want to disconnect all of the storage gadgets after which join solely the disk you want to use because the system disk within the first SATA port earlier than making an attempt the Windows set up. You can join the opposite gadgets after you end putting in the working system.

1. Unscrew the facet panel of the PC and take it out. Doing so on some PC instances could also be tough, so examine the official directions or disassembly movies to learn the way to take action.
   
2. Make certain to not contact the circuit elements along with your fingers on the motherboard until you could have grounded your self. The electrostatic discharge would possibly harm the {hardware}.
3. Look for all of the storage gadgets on the PC and disconnect the extra gadgets. You have to press the connector on the information cable and pull it out.
4. Check the SATA port numbers on the motherboard (not the revision quantity).
   
5. Properly join the mandatory SATA device to the bottom numbered port.
6. Reassemble every little thing and check out putting in Windows.

Check Storage Disk

You also can encounter this error if you’re making an attempt to put in Windows on a corrupt or broken storage drive. You can examine if so by connecting this device to a different pc, or you should utilize diagnostic software program for this goal.

If the disk doesn’t work, that you must exchange it with a brand new one or attempt to restore it with the assistance of a {hardware} specialist or its assist heart.