14 Ways To Fix Windows Boot Loop

After a profitable POST operation, the Windows Boot Manager masses the system loader which additional begins the kernel on your OS as well up. However, in case your pc doesn’t begin attributable to points in any of those phases, you would possibly find yourself in an infinite restart course of known as the boot loop.

Corrupted OS/drivers, registry, MBR (Master Boot Record), system recordsdata, or malicious applications can result in this example. If you’re experiencing the same drawback after updating or manufacturing unit resetting Windows, you’re on the proper place!

But earlier than transferring on, strive rebooting your pc first. If that doesn’t assist, we advise eradicating all of the exterior peripherals and energy biking your device. In case the issue persists, let’s start the troubleshooting with Startup Repair.

Perform Startup Repair

Startup or Automatic Repair scans the pc to repair potential system corruptions that may very well be inflicting startup and booting points. You can do that from a bootable flash drive and even manually, and right here’s how:

1. Press and maintain the ability button till it shuts down.
   
2. Then, begin your PC/laptop computer.
   
3. Again, press and maintain the ability button to flip it off.
4. Repeat the above steps three or more instances till the Startup Repair display pops up.
5. Sometimes, the restore will mechanically repair the problem and allow you to boot into Windows. But in case you get the message, “Startup repair couldn’t repair your PC”, press the Advanced choices button.
   
6. Now, you must get into the Windows Advanced Startup display.
7. Here, choose the Continue possibility and see if it boots into Windows.
   

Repair Boot Sector

One of the first causes for the boot loop is a corrupted MBR or the EFI bootloader (in GPT laborious drives). A fast workaround to this drawback is to restore the boot sector using devoted instructions.

1. First, get into the Advanced Startup/Recovery Environment display, as mentioned earlier.
2. Then, go to Troubleshoot.
   
3. Next, choose Advanced choices.
   
4. Select Command Prompt. 
   
5. Then, select your account and enter your credentials within the next display. This ought to open the utility with administrative entry.
   
6. Now, begin executing the under instructions.

If you will have an MBR drive, it is advisable to rebuild it and when you’ve got a GPT laborious drive, you may strive repairing the EFI bootloader. Follow the devoted instructions in succession from under primarily based in your HDD/SSD drive partition model.

Rebuild MBR

To restore and rebuild MBR, enter the next instructions and press Enter after every command.

Repair EFI Bootloader

To restore EFI Bootloader, enter the next instructions and press Enter after every command.

Get Into Safe Mode

If repairing the bootloader or rebuilding MBR didn’t repair the issue, examine whether or not your pc boots into protected mode. In case the PC doesn’t boot, the issue might be brought about attributable to corrupted Windows recordsdata. But if the pc begins, know that the essential drivers and settings aren’t accountable. 

1. In the Windows RE, navigate to Troubleshoot > Advanced choices > Startup Settings.
   
2. Next, hit the Restart button.
   
3. Once you’re within the Startup Settings display, press F4 to allow protected mode or F5 to allow protected mode with networking.
   
4. Now, wait till the system boots up.

Run SFC, DISM, and CHKDSK Commands

The system recordsdata and pictures can get corrupted when sure sections of your laborious drive are broken, there’s a failed Windows update, failed switch of system recordsdata, or a malware assault. A easy answer to this drawback is to run SFC, DISM, and CHKDSK instructions:

1. First of all, begin your pc in protected mode with networking.
2. Then, open Command Prompt as an administrator from the Start Menu.
3. Now, execute the next command to scan for protected system recordsdata:
   sfc /scannow
   
4. If Windows Resource Protection couldn’t discover any integrity violations, run the DISM command to repair the corruption points along with your Windows image:
   DISM /Online /Cleanup-Image /ScanHealth
   
5. After this operation is efficiently accomplished, strive operating the next command to repair logical and bodily errors inside your storage drive:
   Chkdsk [DriveLetter]: /r
6. In case the amount is utilized by one other storage drive, you must get a message. Simply kind y and hit enter to proceed.
   
7. Now, restart your PC in regular mode for the amount to be checked and repaired. If all the pieces seems nicely, the boot loop ought to be fastened. 

Disable Auto Reboot in Registry Editor

A handbook technique to cease the boot loop is to disable the Auto Reboot function from Registry Editor. While generally this fixes the issue, typically you’ll encounter a BSOD. If that occurs, you may examine the Stop Code and troubleshoot accordingly. Fortunately, we’ve already lined an in depth information on what you are able to do after getting a BSOD error on Windows 11.

1. First of all, boot Windows in protected mode.
2. Next, open the Registry Editor utility from the Start Menu.
3. Then, navigate to Computer > HKEY_LOCAL_MACHINE > SYSTEM > PresentControlSet > Control > Crash Control from the left facet of the window.
   
4. Move to the proper and double-click on AutoReboot.
   
5. In the Edit Value dialogue field, set the Value knowledge area to 0 and hit Ok.
   
6. Now, reboot your pc in regular mode and see if the issue is now resolved.
7. If you’re in a position to boot into Windows, strive uninstalling the conflicting apps first. These might embrace not too long ago downloaded applications and even third-party Antivirus purposes. Also, we advocate uninstalling the driving force or Windows update, which we will focus on additional.

Update or Rollback Device Drivers

Some netizens additionally declare to come across the boot loop drawback after a corrupt or failed driver update. While this primarily occurs attributable to HDD/SSD and chipset drivers, you must think about checking points inside different device drivers as nicely.

1. Launch the Run utility and execute the under command to open Device Manager:
   devmgmt.msc
   
2. Now, search for an exclamation signal in all of the drivers to search out the corrupted ones.
3. Right-click on every of them in succession and hit Update driver.
   
4. In the Update driver dialogue field, choose Search mechanically for drivers.
   
5. In case updating corrupted drivers didn’t repair the boot loop problem, get back to Device Manager, and double-click on the troublesome one.
6. Navigate to the Driver tab and hit the Roll Back Driver possibility.
   
7. In the brand new pop-up window, choose a cause to roll back the driving force and click on Yes.
8. Now, restart your pc in regular mode and examine in case your drawback is now fastened.

Uninstall Latest Windows Update

As talked about earlier, a corrupt or failed Windows update can also be liable for a steady reboot, not permitting your OS as well up. When this occurs, the system recordsdata get corrupted and may trigger malfunctions within the booting operation. Fortunately, it’s potential to uninstall each the newest high quality and have updates that might have triggered this example.

Latest Quality Update

1. Get to the Advanced Recovery Environment and choose Troubleshoot > Advanced choices > Uninstall Updates.
   
2. In the following display, choose Uninstall latest high quality update.
   
3. Then, select your account.
   
4. Enter the right credentials and hit Continue.
   
5. Next, click on on the Uninstall high quality update button.
   
6. Wait for a number of minutes till the update can be restored.
   
7. Press the Done button as soon as it’s accomplished.
   
8. Now, you’ll be navigated to the Choose an possibility window. Here, choose Continue and see in case your working system efficiently boots up.

Latest Feature Update

1. From the Uninstall Windows Update display, choose Uninstall latest function update.
   
2. Choose your account and enter credentials as performed earlier.
   
3. Next, press the Uninstall function update button to proceed.
   
4. Wait till the function update is uninstalled.
5. In case you encounter an error right here, Windows recommends resetting your PC. But earlier than that, we advocate attempting out the opposite options under.

Perform System Restore

Another technique to revert your pc from failed or corrupted updates is to make use of the Windows System Restore function. Usually, an automated restore level is created proper earlier than you run any kind of improve on the system. So, you may revert your system to the state the place you by no means skilled a boot loop.

1. In the Windows RE, go to Troubleshoot > Advanced choices > System Restore.
   
2. Wait till you’re within the System Restore display the place you may choose your account.
   
3. Enter your password and hit Enter.
4. Once the System Restore dialogue field pops up, press Next to proceed.
   
5. Then, choose your restore level and click on Next.
   
6. In the tip, hit the Finish button to substantiate your restore level.
7. Tap Yes within the affirmation immediate.
   
8. Now, watch for the system to get restored. This might take a couple of minutes.
   
9. Click on the Restart button and watch for Windows as well up.
   

Change Boot Settings in BIOS

If your system doesn’t assist UEFI, it’s a good suggestion to allow the CSM function that provides compatibility. Likewise, some methods require handbook configuration of boot precedence after putting in Windows. Otherwise, you gained’t be capable of boot in any respect. Here are a few of the issues you may strive in BIOS to see in the event that they may also help repair the boot loop:

1. First, power restart your pc and press the boot key a number of instances to get into BIOS.
2. Navigate to Boot Order settings.
3. Then, be sure that Boot Option #1 is accurately configured. For instance, if it’s the primary time you’re booting after putting in Windows from a media drive, choose the Windows Boot Manager.
   
4. Save and exit from BIOS and your pc ought to boot into Windows.
5. In case you’re nonetheless experiencing the boot loop drawback, get into the BIOS interface once more. This time, strive enabling CSM Support (if accessible) so as to add MBR compatibility to your system.
   
6. Some customers even fastened the problem by enabling the Legacy Boot possibility. If that is accessible on yours, do allow it and examine for the end result.
   

Reseat Components

While Windows registry and system file corruption are frequent causes of boot loops, {hardware} failures are additionally equally accountable. But earlier than moving into changing the parts, it’s a good suggestion to reseat your RAM, laborious drive, and graphics card.

On Desktop

1. Shut down your pc and flip off the PSU. We advocate eradicating the ability adapter too.
   
2. Then, press the ability button for not less than 10 seconds to discharge the remaining capacitors.
   
3. Now, unscrew the PC casing and thoroughly take away it.
   
4. Navigate to the RAM slot and slide each locks outwards.
   
5. The RAM stick ought to come out. Carefully pull it out of the PC.
6. Repeat the method when you’ve got a number of RAMs.
7. Now, clear the slots and RAM stick(s) using a soft-bristle toothbrush (barely dipped in Isopropyl Alcohol).
   
8. Reseat the reminiscence modules within the identical slots as earlier than. Note that it is advisable to place them in alternate slots (when you’ve got two RAM sticks). If you’re confused relating to this, examine the motherboard handbook.
   
9. While you’re at it, make sure the HDD or SSD can also be correctly inserted into its slot.
10. You might untighten the screws that maintain your storage drive in place and thoroughly take away it from its part.
    
11. Next. clear the drive and the slots making certain no particles is caught inside.
12. Then, reseat the element correctly.
13. Also, you may take the devoted graphics card out of the PCIe slot. While you’re doing this, additionally unplug the cables connected to the PSU.
    
14. Now, clear the GPU and the PCIe slot. Also, examine for free or damaged connectors.
15. Then, reseat the graphics card in its PCIe slot and in addition make sure the PSU cable(s) are securely inserted.
    
16. Close the chassis and tighten all of the screws.
17. Finally, begin your desktop pc and examine if the boot loop problem is now resolved.

On Laptop

1. First, correctly shut down the pocket book pc.
2. Remove the exterior battery (if accessible).
   
3. Then, discharge the remaining capacitors by urgent the energy button for not less than 10 seconds.
4. Now, pry out the laptop computer’s backside panel.
   
5. Disconnect the inner battery connection (if accessible).
   
6. Next, pull the 2 clips that maintain the reminiscence stick in place. This ought to pop it out of its slot. Pull it out fastidiously.
   
7. Then, clear each the slot and the RAM stick(s). You make use of a soft-bristle brush or perhaps a microfiber fabric, whichever is obtainable.
   
8. Now, reseat the reminiscence module and push it backward. You ought to hear a click on sound confirming it has been seated correctly.
   
9. Navigate to the HDD/SSD part and unscrew the areas to take the drive out.
   
10. Clean the slot and the complete part earlier than reinserting the storage drive.
    
11. Lastly, shut the underside panel and begin your laptop computer.

Reset and Update BIOS

Since your motherboard’s BIOS firmware is liable for offering needed data through the boot course of, it might trigger an infinite loop drawback if the settings get corrupted.

If not one of the aforementioned options helped you, strive resetting the BIOS to see if this will repair it. Here’s a fast demonstration of how to do it on an MSI motherboard:

1. Open BIOS Interface as mentioned above.
2. Next, navigate to Settings.
   
3. Here, choose Save and Exit.
   
4. Then, select Restore Defaults.
   
5. In the affirmation immediate, click on Yes to reset your BIOS.
   

Flashing a brand new BIOS retains the working system appropriate with the {hardware} parts. If you have been dealing with the boot loop problem attributable to incompatibility, it’s a good suggestion to update the motherboard’s BIOS firmware:

1. Open one other PC or laptop computer and obtain the newest BIOS update file on your main device.
2. Unzip and switch the content material to a flash drive (with not less than 8 GB free area and formatted in FAT32).
3. In your main pc, get into BIOS and open M-Flash.
   
4. Insert the flash drive and choose the BIOS update file.
   
5. Hit Yes to start out the set up and wait till your BIOS will get up to date. Once it’s accomplished, your working ought to boot up.

Factory Reset Your Computer

If you’re nonetheless experiencing the identical drawback, it’s time to reset your PC to manufacturing unit defaults. This will erase conflicting drivers and third-party purposes which may very well be inflicting the boot loop.

1. Get to the Windows Recovery Environment and choose Troubleshoot.
2. In the following display, choose Reset this PC.
   
3. Then, select Keep my recordsdata. You might select Remove Everything in case you’re going to manufacturing unit reset.
   
4. Wait till Reset this PC display pops up. Here, choose your account and enter your credentials to proceed.
   
5. Next, choose Local reinstall.
   
6. Again, wait till issues prepare, and on the brand new display, faucet the Reset button.
   
7. Finally, wait till your PC will get reset.
   

Perform Clean Installation

Unlike manufacturing unit resetting, clear set up will erase all the pieces from the laborious disk, reinstall the working system, and begin all the pieces from scratch. Even if this answer doesn’t work, you may verify that it’s a {hardware} fault.

1. Force restart your pc and hit the boot key to enter the BIOS interface.
2. Change the boot precedence to USB.
3. Insert the Windows bootable USB flash drive and boot up.
4. Once the Windows Setup display pops up, choose your language, time, forex format, and enter methodology. Then, hit Next.
   
5. Next, click on the Install Now button.
   
6. In the following window, enter the product key. If you wouldn’t have one, choose I don’t have a product key from the underside of the dialogue field.
   
7. Then, select the Windows OS you’re going to put in and hit Next.
   
8. Now, accept the license phrases and press Next.
   
9. Next, choose Upgrade: Install Windows and keep recordsdata, settings, and purposes in case you merely want to improve. Otherwise, it’s possible you’ll proceed with customized set up, which is what we’re going to choose right here.
   
10. Then, choose the drive the place you want to set up Windows and hit Next.
    
11. Wait till Windows will get put in and comply with the on-screen steps to finalize it.
    

Check and Replace Faulty Hardware

If you’re nonetheless experiencing the boot loop problem, it’s undoubtedly a {hardware} element failure. Most customers declare to have issues with their laborious drives and reminiscence.

Along with RAM and storage drive, some customers have additionally fastened the boot loop problem by changing graphics playing cards, energy provides, or motherboards. If nothing helped, strive contacting the producer or take your pc to the closest service heart.